Filter By:
Seatposts

$99.95
Thomson's Elite Seatpost is perhaps one of the most recognizable bicycle components in the world and it has earned its reputation as a super-strong, light and reliable beauty. With roots in the aerospace industry, Thomson builds the post with a tough and light 7000-series aluminum body, an elliptical extrusion that adds strength and stiffness, and a head and seat clamp forged and machined from a block of aluminum to eliminate any possible weak areas. Plus, its simple-to-use 2-bolt seat clamp allows speedy, infinite and secure seat angle adjustment from minus 5 degrees to plus 29 degrees. Upgrade your favorite ride to a Thomson seatpost and start riding in style.

$37.00
Dimension Suspension Seatpost
- Clamp Style: Std Rails
- Diameter: 27.2mm
- Length: 350mm
- Material: Aluminum
- Max Height: 255mm
- Min Height: 130mm
- Offset (mm): 0mm
- Seatpost Type: Suspension
- Travel (mm): 35mm
- Weight: 450g

$286.00
Salsa's Regulator Ti Seatpost delivers the maximum comfort and performance of titanium, along with the convenience of independent adjustment of saddle angle and fore/aft positioning. This post is built for the long haul with specifically designed, stainless steel bolts, as well as CNC'd aluminum head internals and saddle clamps to provide the ultimate in strength and durability.
- 3/2.5 titanium with a brushed finish
- Length: 410mm
- Proprietary head design allows independent saddle angle and fore/aft positioning
- Small, lightweight head design uses CNC-machined AL-6061 internals with stainless steel threaded stud to prevent thread stripping
- CNC-machined AL-7075 saddle clamps
- Specially designed, stainless steel bolts provide ultimate strength and durability
*NOTE: Not for use with carbon seat rails or ovalized seat rails

$105.00
Seatposts can be an overlooked part of the bike, but at Whisky Parts Co., everything gets the same attention to detail so your ride never suffers. Their seatposts are made from the highest quality carbon, ensuring they are durable, lightweight, and comfortable. Whether you’re remounting during a cross race or abusing them on the trail, you'll be glad you have the No.7.
- Carbon shaft absorbs trail chatter
- UD carbon shaft, forged aluminum head

$199.99
The latest generation Thudbuster ST is superior to its predecessor in every way. Building on Thudbuster's proven parallel linkage technology we have completely re-designed the seatpost for increased durability, a higher rider weight limit, and additional suspension travel, as well as ease of use through tool-free elastomer change and a single-bolt seat clamp design.
By improving on this already legendary design, we're confident to say that the newest generation Thudbuster is the most advanced suspension seatpost ever made.
- Travel: 50mm
- Weight: 580g
- Max Rider Weight: 330lbs

$99.95
Sleek design and ultimate functionality of the WCS 1-Bolt seatpost are the hallmarks of Ritchey design. Single bolt-actuated side load clamp offers easy adjustability and simple security in a post that works as nicely as it looks.
- 3D Forged 7050 Alloy
- Available in 27.2, 30.9 and 31.6mm diameters
- Available in 350 and 400mm lengths
- 20mm Offset
- 7x7mm saddle rail clamp included
- Interchangeable clamps available for carbon rail saddles
- Saddle Clamp Torque Spec: 12Nm
- Finish: Blatte
- 195g (27.2/350)

$376.00
The Reverb Stealth features Vent Valve Technology for super simple service if the need arises. Redesigned internals provide effortless actuation and increased reliability. With reduced overall post lengths and new travel options, riders of all shapes and sizes benefit from more travel than ever before. The new Reverb Stealth redefines what it means to simply go up and down.
- Shorter overall post length
- Stealth Internal cable routing

$70.00
The Salsa Guide Deluxe Seatpost is premium aluminum: lightweight, strong, and drama-free. Count on it to be there when you need it.
- 2014 Aluminum shaft
- Two-bolt head

$429.00
The Reverb Stealth features Vent Valve Technology for super simple service if the need arises. Redesigned internals provide effortless actuation and increased reliability. With reduced overall post lengths and new travel options, riders of all shapes and sizes benefit from more travel than ever before. The new Reverb Stealth redefines what it means to simply go up and down.
- Shorter overall post length
- Stealth Internal cable routing

$18.99 - $20.00
Kalloy's 602 seatpost comes in a wide variety of diameters to fit most frames. Simple, sturdy, and lightweight, the 602 makes a great replacement seatpost.

$49.95
Proven 2-bolt design provides a class-leading balance between strength, weight, and easy adjustability. Low-profile clamp reduces stress on lightweight rails and won't bottom out.
- Material: 6061 alloy
- Saddle clamp: standard
- Saddle clamp torque: 13Nm (max)
- Seat collar torque: not specified - follow frame/seat binder specification

$300.00
ENVE's proven twin-bolt seatpost design refined for the modern road bike with seatpost battery integration capabilities.
- Material: Carbon Fiber
- Hardware Material: Titanium
- Saddle Angle Adjustment: 0 – 27 degrees
- Saddle Rail Compatibility: 7x10mm Carbon Rails / 7mm Round Alloy Rails
- Torque Spec, Saddle Rail Clamp Bolts: 5.5Nm
- Torque Spec, Seatpost Collar: Determined by your Frame manufacturer/Seatpost Collar
- Weight: 210g (25.4mm), 204g (27.2mm), 204g (30.9mm), 204g (31.6mm)

$149.99
- Highly tested & engineered unidirectional carbon tube offers outstanding fatigue & impact strength for a lightweight XC post
- Simple, lightweight 2 bolt design permits the saddle to be installed without disassembling the head
- Angled clamp bolts allow easy tool access for hassle free adjustment and tightening
- The rubber seatpost grommet fully seals the post to prevent water entering your seat tube
- Hunter head is suitable for most rail types 7/8mm alloy rails and 7/9mm carbon
- Wide lower cradle gives extra rail support for lightweight saddle rails
- Narrow upper cradle increases the amount of forward/back saddle adjustment
- Tilt Adjustment 6° up 12° down with Zero offset

$29.99
- RaceFace Ride XC Seatposts made of forged AL-6061
- Forged, anodized and shot peened AL-6061 mast
- 2-bolt head holds saddle securely while retaining easy adjustability
- Weight: 295 g

$275.00
ENVE's proven twin-bolt seatpost design refined for the modern road bike with seatpost battery integration capabilities.
- Material: Carbon Fiber
- Hardware Material: Titanium
- Saddle Angle Adjustment: 0 – 27 degrees
- Saddle Rail Compatibility: 7x10mm Carbon Rails / 7mm Round Alloy Rails
- Torque Spec, Saddle Rail Clamp Bolts: 5.5Nm
- Torque Spec, Seatpost Collar: Determined by your Frame manufacture/Seatpost Collar
- Weight: 178g (25.4mm, 25mm offset), 168g (27.2mm, 0mm offset), 178g (27.2mm, 25mm offset)

$57.00
On today's road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored seatpost color is available on the Zipp Service Course Seatpost. Since the introduction of our line of Service Course and Service Course SL components, we've had amazing success with our pro-level athletes in all disciplines. While the successes have reinforced our design decisions, we have also drawn from their feedback. We not only learned how and why athletes make their equipment choices, but how our manufacturing methods and materials affect product performance. With new knowledge as well as new engineering, we are proud to offer redesigned Service Course seatposts.
- Material: 6061 aluminum
- 2-bolt adjustability
- Minimum insertion length: 90mm

$229.99
The minimal design of the ShockStop Seatpost blends seamlessly with the aesthetic of modern gravel, road, and e-bikes. Along with the ShockStop Stem, this system works together to reduce fatigue and strain, letting you ride further, faster, and more comfortably.
Benefits:
- Go further—reducing fatigue from bumps and vibrations
- Ride faster—energy that is normally wasted suspending your body is converted into forward motion
- Take control—customize your suspension feel to float over obstacles and maintain control
Details:
- 35mm of active suspension travel
- Infinitely adjustable stiffness via pre-load adjustment and swappable springs
- Adjusting stiffness / pre-load does not reduce travel
- Swappable springs included to accommodate varied rider weight and preference
- Optimized linkage geometry provides ultra-responsive suspension feel
- Check technical specifications for compatibility
What's in the Box:
- 1 x ShockStop Seatpost
- 2 x springs (1 pre-installed, 1 included in box for increased stiffness)
- All required hardware

$55.00
The Velo Orange Grand Cru seatpost is made from one piece of aluminum, internally ovalized to trim weight. The Grand Cru seatpost’s head is integral with the post – not pressed on – for great strength and weight savings.
0mm Setback: Zero-setback/offset posts are commonly used on mountain bikes and by some bikepackers. The Grand Cru zero setback post uses a one-bolt, ergonomic side-adjustment mechanism for both saddle rail clamping and fore-aft adjustment.
30.2mm Setback: For riders who prefer the comfort of leather saddles but have found proper saddle placement difficult due the short rails on leather saddles Velo Orange offers the Grand Cru Long Setback with an ample 30.2mm of setback. This model uses a two-bolt design.

$249.99
- Internal Routed, Infinitely Adjustable Design
- Simplistic - Fully Sealed Alloy Cage / Stainless Tip Cartridge System
- Durable 3D Forged Head - With 7075-T6 Forged Clamp
- Featherlight Thumb Actuation - Industry Leading
- Intelligent Keyway System - Ensures Minimal Play
- Easiest Installation - Cable Head Attaches At Base
- Cold Weather Approved - Tested Down To -20C.
- 1x Lever included - With Premium Jagwire Lex Slick Housing, Stainless Cable and Hardware
- Remote Position: On handlebar
- Cable Routing: Internal
- Offset: 0mm
- Clamp Type: Standard, double bolt
- Seat Post Material: Aluminum
- Seat Post Weight: 510g

$309.00
- Built on the revered FOX Transfer platform, the Turbine R Dropper Post has infinite height adjustment with up to 175mm of drop
Specs:
- Seat Post Diameter: 31.6mm
- Travel: 200mm
- Cable Routing: Internal

$96.00
The new SL-K SBS SB0 seatpost is lighter and stiffer than ever. Using a UD carbon shaft with a bonded alloy head and a sophisticated SBS clamp design, we can achieve what we believe is the finest SL-K seatpost yet. Available with a polymer Di2 battery holder.
- UD carbon shaft with bonded alloy head
- Forged alloy "SBS" 2-bolt head
- Chromoly hardware
- 20mm setback
- Fits 7mm standard rails and 7x9mm oval rails
- 221 grams

$309.00
Saddle Up
Based on the latest FOX Transfer platform with its proven performance, the new Turbine R Dropper Post features a slick seat clamp design for reduced stack height and a 25g weight savings from the previous version. This post will treat you right.
Less is More
New, patent-pending FOX seat clamp design dramatically reduces stack height, allowing you to fit more travel into a shorter space.
Full Coverage
Proven FOX-designed internals provide infinite height adjustment, but perhaps more importantly—even easier serviceability.
No-Sweat Installation
Mounting a saddle and getting your saddle position dialed is easy thanks to the user-friendly seatpost clamp.
Brilliantly Uncomplicated
Uses standard shifter cable and housing. You know, just to keep things real. Oh yeah—it's also 25g lighter than the previous version.
- Compatible with Matchmaker
- Includes post only
- Mechanical lever actuation
- Head Type: Zero Offset—2 Bolt
- Weight: 520g

$200.00
The X-Fusion Manic post uses internal cable routing and was designed around a low-profile seat cradle and seal collar to fit a broad range of frames. The mechanism is air-sprung and hydraulically locked. The remote can be run on the left or right, above or below the handlebar, but is optimized as a left shifter replacement for 1x drivetrains.
- Cable activated, hydraulic action, infinitely adjustable travel
- Double key-way design prevents lateral twisting
- Double bolt clamp with a wide range of seat angle adjustment. Fits both standard and 7 x 9 mm Carbon Rails
- Sealed cartridge internals for quick replacement
- Low profile head-seal and saddle clamp increase useable travel

$479.95
Thomson Covert Elite Dropper Seatpost-31.6 150mm Black Internal.
We've set the bar with the Thomson covert black dropper post. It's designed around internal routing for clean installation and an updated shift style remote lever for effortless operation.
The Thomson Covert Dropper includes a new shifter oriented remote lever for easy operation. The cartridge-based system is designed to have the longest service life in the industry. If repair is needed, it's fast, affordable, and simple. Every part that makes up the Covert dropper is carefully chosen, and of the highest grade quality available.
- Custom made Norglide bearing bushings and Trelleborg O-Rings and seals
- Thomson saddle clamps and fasteners
- Motul Oil for durability and precision quality.
- The return speed is damped in the last 15mm of upward travel to be gentle on your seating area.
- 60mm (Ø27.2 only), 100mm, 125mm, 150mm of infinite travel.
- Passes ISO 4210 fatigue and strength tests for seat posts.

$31.99 - $32.00
Dimension Alloy seatpost.
- 1-piece forged AL-2014
- Clamp Style: Standard Rails
- Material: Aluminum
- Max Height: 245mm
- Min Height: 35mm
- Weight: 250g

$16.99
Stolen Thermalite Pivotal Seatpost. Thermalite is proprietary material made with Nylon 66 base w/ 50% longer glass fiber infusion. Thermalite posts are 30% lighter than the current Alloy posts on the market.
- Dupont Nylon 66 with 50% longer glass fiber infusion
- 1/3 lighter than any alloy post on the market
- Compatible with all Pivotal seats
- Weight: 2.8oz.

$104.95
Carbon seatpost with a proven low-profile, 2-bolt clamp that won't bottom out on the saddle.
- Low-profile clamp reduces stress on lightweight rails
- 2-bolt design securely holds the saddle in place and is easy to adjust
- Offset: 25mm
- Clamp Style: Standard Rails
- Material: Carbon

$349.00 - $359.00
The proven Transfer seatpost gets lighter and tighter. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth.
"Factory" says it all. The best-of-the-best technology we have to offer is available in our Factory Series models with our buttery smooth, ultra-durable Genuine Kashima Coat. These products are World Cup proven.
The Transfer continues the excellent reputation of smooth function and great reliability with an infinitely adjustable height design, and internal or external cable routing options. Low lever force and great modulation make it easy to regulate return speed and small height adjustments. The Factory Series Transfer features Genuine Kashima Coating for maximum performance.
- Cable actuated with tool-free quick disconnect for easier installation and removal
- Low lever force provides consistent actuation pressure even with saddle weighted or unweighted
- Easy to modulate return speed with lever
- Factory Series models feature Genuine Kashima Coat
- Remote lever sold separately

$299.00 - $309.00
The proven Transfer seatpost gets lighter and tighter. Completely redesigned from the ground up, with improved serviceability, decreased weight, reduced length, and decreased insertion depth.
Performance Elite Transfer Posts retain the same internals, diameter options, drop options, shortened stack heights, new patent-pending head design and proven internals as the Factory Series but have a black anodized upper.
- Cable actuated with tool-free quick disconnect for easier installation and removal
- Low lever force provides consistent actuation pressure even with saddle weighted or unweighted
- Easy to modulate return speed with lever
- Remote lever sold separately
- 0mm offset
Page 1 of 4
Next page