Filter By:

  • Show More Sizes
  • Show Fewer Sizes

BMX

Odyssey Aaron Ross V2 Tires
$25.99
Aaron’s signature tires feature an updated block tread and bigger sizing. The uniform block tread is reminiscent of his original tire, but freshened up. Coming in at 20x2.30" and 20x2.40"
Odyssey Aitken Knobby Tires
$25.99
A classic knobby version of the Aitken signature tire. Traditionally a more dirt-specific tire but the tire’s fast rolling center tread allows it to be used on all terrains. - 20 × 2.35 only Single ply casing
Odyssey Aitken Tires
$25.99
Mike Aitken's popular signature tires for street and dirt. Ideal for use at high speeds. - 20 × 2.25, and 20 x 2.45 Dual ply casing
Odyssey BOSS Stem
$64.99 - $74.99
Using Odyssey's popular TL48 stem as a springboard, Aaron Ross’ signature BOSS stem is a classic top load design with 52mm of reach and a 35mm rise. FEATURES - Six bolt clamping configuration - Headset pre-load bolt recess (32mm diameter) - 6061-T6 aluminum, CNC machined SPECS - 52mm reach - 35mm rise - 11 oz
Odyssey Evo 2 Brakes
$49.99
The Evo 2 brake is the industry leading U-brake because of its modular hardware features and affordable value. Install it as a rear brake or front brake straight out of the box. Comes with Odyssey’s convenient double lugged straddle cable, custom curved cable hanger and an array of hardware for adapting the brake to every possible set-up. Forged from aluminum for strength, and to avoid unnecessary upcharges from frivolous CNC machining. The Evo 2 is the natural progression of the original Evolver. It has seen constant refinement and new running changes to keep it as the standard in BMX braking. This design allows for a seemingly limitless amount of cable installation options, while remaining equally powerful as both a front OR rear wheel brake. New forge tooling was created that provides for a sleeker side profile. Arms are forged prior to machining for strength and durability. Contrary to the uneducated in metallurgy, a forged metal piece is of much higher strength than a piece machined from a block of material. FEATURES: - All of the cable set screws are now flat-tipped to prevent excess damage to the cable’s inner wire - Cable lugs are smaller and use a 10 mm hex head - Pre-lugged straddle cable is shorter - Front cable adapter is smaller and made of aluminum - Flush surfaces, with the lowest possible overall stack height - Front or rear wheel use - Redesigned brake pads - Two sets of springs (hard and soft for custom tension/modulation) - Spring tension indicators (easy set up) - Newly designed straddle hanger
Odyssey GTX-S Gyro
$39.99
6061 aluminum with precision sealed mechanism bearing and lower (17mm) stack height.
Odyssey Euro Bottom Bracket
$32.99
- For 19mm crank spindles and threaded Euro bottom bracket frames. - High-quality four bearing design with aluminum cups.
Odyssey 49er 4-PC Bar
$79.99
Odyssey's 49er is a traditional-looking 4-piece bar that uses multi-butted main tubing, traditional 7/8" crossbar for strength, larger radius bends for greater durability, and welded end caps to reduce flex. These bars have a post-weld heat-treating which is guaranteed against manufacturer’s defects. SPECS - 9-inch Rise - 29-inch Width - 1.5° Upsweep - 12° Backsweep - 2lbs 3.4 oz
Odyssey Aaron Ross BOSS Bars
$69.99
Introducing the BOSS bar. Aaron Ross’ new signature handlebar now features a 9.125-inch rise along with a traditional 7/8-inch crossbar tubing for superior strength and durability on taller bars. SPECS - 9.125-inch rise - 29-inch width - 12° backsweep - 2° upsweep - Multi-Butted 41-Thermal® processed 4130 chromoly - Weight 34.6 oz
Odyssey Ghost Brake Pads
$8.50
One of the most important goals that Odyssey had when they sat down to work on new braking designs was to make the whole system easier to install (and remove) without sacrificing performance. They also wanted to be sure that every component would be very affordable too. The Ghost Pad addresses the hassles of brake pad installation by eliminating the traditional dome shaped washers used for toe-in. The pad improves stiffness by building the toe-in into the pad shape and utilizing a solid extruded aluminum frame at its core. The Ghost Pad’s assembly consists of simply lining it up with the rim and tightening down an M6 female bolt. Comes stock on the Springfield brake. SPECS Hardware: - In-bound bolt, 5mm Hex Key, M6x1.0 Thread - Pad Material: Black (standard) or Clear Rubber (Soft) - Weight: 1.0oz / 28g (pair)
Odyssey Graduate PC Peg
$18.99
The 4.5-inch peg features a full 4130 core with a long-lasting, fast-sliding, plastic sleeve. - Sold individually - 14mm with 3/8” adapters only - Replacement sleeves sold separately - 4.5" (length) x 1.5" (outer diameter) - 4.5 oz (9 oz for a pair)
Odyssey Graduate PC Pegs - Replacement Sleeve
$5.99
Replacement Sleeve for Odyssey's Graduate PC Peg. Sold individually.
Odyssey Gyro G3
$19.99
Odyssey's original dual cable detangler system has been the industry standard since day one. Odyssey has been making the Gyro since 1986 and constantly improving it along the way. Everything you need to run a Gyro. Odyssey Gyro cables and upper and lower cable stops included.
Odyssey Key Chain
$33.99
Traditional chain pins are 3mm in diameter. The Key Chains are 5mm, and they are available with a hollow or solid pin assembly. These oversized pins are 4 times stronger than traditional pins, and the chances of bending one, whether the pin is hollow or solid, are essentially zero. The 5mm riveted pins provide added strength, but they also provide a bigger contact surface with the chain’s plates, which makes them harder to push out or bend. The hollow pin assembly, by design, allows for a stronger rivet connection to form during manufacturing, resulting in a stronger chain overall. Each plate has a low profile and an extra narrow waist that makes it harder to catch the plates at unwanted times. At 1.4mm, the plates are substantially thicker than the plates of any other chain, and they’re also more than 50% harder to bend than the thickest existing 1.2mm chain plates too. Users can break and re-join the chain with just a 3mm hex key. The chain’s half link plates are taller at the bends to both increase stiffness and minimize stretch. Since the use of a chain breaker to re-join the chain has been eliminated, the pins can retain their original level of tightness from the factory. Also, carrying a spare master link and 3mm allen key in most cases is enough to repair the Key Chain when riding, so lugging around a chain tool is usually unnecessary. By using material as efficiently as possible, Odyssey has strengthened every component of the chain and kept the weight in the same range as their Bluebird chain. Stretching of the chain is minimized by using a standard alternating plate pattern and limiting the chain to a single, beefed up half link. This configuration maximizes the lifespan of the sprocket and driver. - Width: 1/8-inch
Odyssey Pivotal Seat Post
$25.99 - $29.99
It’s a traditional straight up pivotal design with a 200mm length.
Odyssey R/F Series Pre-Load Bolt
$19.99
This custom 7075-T6 aluminum pre-load bolt design is included with every Odyssey fork. - Fits both a 6mm and 8mm allen key. - Front brake cable thru-way hole for removal without disconnecting brake hardware. - Designed with an easy-cut thread groove if you cut your fork’s steerer tube down.
Odyssey Quartet Hub Guard
$24.99
Designed specifically for use with Odyssey's Quartet FRONT or REAR hubs. SPECS - Forged from 7075-T6 aluminum for greater strength and durability - Steel insert prevents guard deformation, prolonging bearing life
Odyssey Pro Headset (Conical)
$24.99
New dust cap design, with Monogram laser etched logo, for a cleaner look to accommodate a taller riding set up with less spacers. Same quality as Odyssey's Pro Headset using high-quality sealed bearings and a precision tapered wedge to keep the headset tight at all times. FEATURES - High-quality sealed bearings. - Color matched spacers included. - 15mm dust cap. With 3mm, and 2mm spacers - Laser etched Odyssey bearings. SPECS - Campagnolo standard spec. - 1 1/8-inch integrated headset. - 45º tapered bearings - 41.8mm outer diameter (fits 42mm BMX head tubes).
Odyssey Par Ends
$3.99
Odyssey's custom-designed Par Ends come standard with all of their grips. Its special plastic composite will not shatter like cheap bar ends do, and they’re very lightweight. The Par End is a combination of the over-the-bar-style cap and the inside-the-bar-style to prevent the inner portion from blowing out like it does on ordinary press-fit bar ends. Comes stock on all of Odyssey's grips.
Odyssey OG/PC Pedals
$35.99
A huge leap forward in pedal technology that results in a simpler overall design. Extremely lightweight plastic bodies eliminate the need for bearings and allow for a spindle that is significantly stronger than normal. Metal pins make the pedal very grippy, and the pedal will still function normally when pins are removed from one side for grind tricks. No flimsy outboard end caps. Pedal body halves are easy and inexpensive to replace – instead of replacing the whole pedal. - 9/16-inch, heat-treated, 4140 chromoly spindle - Proprietary high-strength plastic composite
Odyssey Monolever
$19.99
The Monolever was an instant classic and has become a clear favorite with pro riders around the world because of its familiar feel, smooth edges and variety of handle options.
Odyssey MPEGs Steel Pegs
$14.99
- 4140 Chromoly - 3 Possible peg positions for longer peg life - 14mm with 3/8-inch adapters included - 4 inches (length) x 1-3/8 inches (outer diameter) - Sold in pairs - 8.75 oz (17.5 oz for a pair)
Odyssey M2 Monolever
$24.99
The M2 lever works with a single cable or Odyssey’s patented dual cable system. The M2 cable system improves braking power for GYRO users. - Right hand only (works flipped on the left) - M2 specific upper cable and single cable coupler included.
Odyssey M2 Brake Cable
$5.99
Compatible cable for M2 Monolever.
Odyssey Linear Slic Kable w/K-Shield
$9.99
The Odyssey K-Shield Linear cable features a pre-stretched inner Slic Kable covered in a linear casing to prevent binding and an outer K-Shield mesh housing for less weight over a standard steel mesh housing. (2.9 oz)
Odyssey Linear SLS Slic Kable
$12.99
This is Odyssey's top-of-the-line brake cable that ties together all of their most advanced braking technology. - Utilizes the original BMX Linear Slic Kable housing to prevent binding when the bars are rotated. - Factory installed ferrule ends with inner volcano shape to prevent housing blow out; a Linear Slic Kable standard since 2008. - Specially coated inner wire for ultra low friction, a proven feature resurrected from their once famous Brakeline cables. - Gyro lug included at one end of the inner wire for use with detanglers. - 60-65mm in length.
Odyssey La Guardia Sprocket
$54.99
A total redesign of Odyssey's popular MDS sprocket. With a built-in full guard, this sprocket lives up to its name, helping to protect your chain from anything you can throw at it. Sprocket thickness increases towards the guard area for greater strength. Compatible with all chain widths. - 7075 Aluminum
Odyssey HGS Spokes
$19.99
- Straight gauge spokes with a proprietary grade of stainless steel that is as good or better than the materials used by the world’s most renowned spoke makers. - Sized and dimensioned specifically for BMX.
Odyssey Gyro G3 Upper Cables
$8.00
- Upper cables for Odyssey's Gyro G3 (sold separately) - Universal fit. - Upper cables only.
Odyssey Grandstand PC Pedals
$19.99
The Grandstand pedal features a unique slim profile, a wide platform and a comfortable concave that feels exceptional as soon as you set foot on it. All of Odyssey's pro riders have been after them since the first samples came in. The pedal features a unique bearing configuration that allows a big spindle to be paired with a slim pedal body. - Genuinely Thin Body. - 17mm at center with uninterrupted dual concave. - Foot-sized 105mm wide. - Full Size 14mm heat-treated axle with 17mm wrench flats and 6mm broach. - 8 oversize plastic pins per side. - 9/16” only.
Page 1 of 4 Next page