Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Fenders

$21.00
Just the thing for rainy weather, the Portland Design Works minimalist Origami Rear Seatpost Fender attaches to a clamp-on bracket you mount to your seatpost. And it packs down so you can easily store it when not in use.
- Length: 445mm (7.5")
- Weight: 160g (5.6oz)

$37.99
The X-Blade 27.5+/29-inch is a high-quality 2-component clip-on fender for the rear wheel of a 27.5+/29-inch mountain and trekking bikes. Due to the quick-release mounting, the fender can be fitted to almost any seat post and optimally adjusted to the wheel using the 2-joint technology.
- High performance dual compound plastic
- Easy quick-release-fastening by pre-adjusted powerstrap
- 2 joints for optimized adjustment to all frames
- Optimized dirt protection
- 27.5+ and 29-inch wheel compatible

$37.99
The Shockblade 26/27.5-inch is a clip on front, high-quality 2-component fender for mounting on the fork of 26-inch and 27.5-inch mountain and trekking bikes.
- Virtually unbreakable high quality dual compound plastic
- Hidden chuck cone adapter which is fitted once during first assembly
- Easy quick-release fastening
- Optimized dirt protection
- Fits almost all suspension forks
- 26-inch and 27.5-inch wheel compatible

$24.95
Topeak's DeFender M1 front fender offers durable rain and mud protection on wet and sloppy rides for your 27.5- or 29-inch wheeled bike. It's incredibly light and easy-to-use, too. The M1 installs easily to any standard fork, even reverse arch designs and seamlessly integrates with the front end of your bike. The quick-release attachments allow the DeFender to be installed and removed in seconds.

$35.00
Front Fender:
• Front fender made of durable all-weather polymer
• Mounts to most suspension and rigid forks
• Fits oversized tapered steer tubes along with small and standard sizes. (18.5-34.5mm ID)
• Extra-wide profile for 3-5" wide tires
Rear Fender:
• Minimalist seat post fender made of durable all-weather polymer material
• Quick-release mount snaps on and off in seconds
• Wide profile design
• Features an adjustable fender angle to fit most bikes
• Extra wide profile to fit 3-5" tires

$59.99
Turn your bike into an all-weather vehicle with Planet Bike's Hardcore Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.

$67.99
IMPACT-RESISTANT CLEANERS FOR THE BIKE
Fender set made of robust sandwich construction
A really brilliant performance! The SKS BLUEMELS BASIC mudguard set not only integrates perfectly on the bike, but also reliably protects against dirt and splash water. Thanks to the flexible sandwich construction, in which extremely fine aluminum strips are embedded in a plastic coating, the fenders are extremely robust, rigid, and protected against corrosion.
Stylish driving fun with a safety system
With its glossy black surface and black fastening components, the BLUEMELS BASIC also leaves nothing to be desired in terms of looks. The ASR safety system ensures that the struts are decoupled if branches get caught between the spokes so that the wheel does not lock up. The V-struts with fixed bridges guarantee an individual adjustment, the bottom bracket cut-outs make assembly possible even in tight spaces. Includes accessories and struts.
- Aluminum/plastic sandwich construction
- V-struts with fixed bridges for flexible adjustment
- ASR safety system
- Bottom bracket cutouts
- Made in Germany

$21.95
Topeak's DeFender M1 front fender offers durable rain and mud protection on wet and sloppy rides for your 26-inch bike. It's incredibly light and easy-to-use, too. The M1 installs easily to any standard fork, even reverse arch designs and seamlessly integrates with the front end of your bike. The quick-release attachments allow the DeFender to be installed and removed in seconds.

$89.99 - $120.00
- Rugged 6061 aluminum construction is corrosion resistant
- 100mm mudflaps provide ultimate coverage and are double-riveted for durability
- Hardware is all stainless-steel and pre-installed for hassle-free mounting
- V-stays for added stability
- Disc brake compatible
- 50mm width
- Release Tabs on front fender for added safety
- Meets EN test standards

$16.00 - $21.00
Optimized for RockShox forks, RockShox MTB Fenders deliver exceptional protection for your fork, with deep side skirts to keep the mud and debris away from the most vital parts of your fork—and your body. Take your bike's customization to the next level with nine color offerings made to match RockShox decal packs—or go black-on-black for that minimalist look. MTB Fenders come complete with four beefy zip ties for installation so you can get to the trailhead sooner and shred with much less mess.
- Works on all RockShox fork models
- Comes with 4 zip ties for immediate installation
- Offered in a wide range of colors that match RockShox's fork decal packs
- Designed specifically for RockShox forks
- Deep side skirts protect stanchions and dust seals from rocks and debris
- Precisely placed mounting holes make the fender follow the wheel's contour, minimizing contact when the fork is compressed

$39.95
Specifically designed for 27.5” and 29” wheeled MTB’s. The DeFender front and rear fenders are the perfect choice for lightweight durable mud protection on those wet and sloppy rides. Quick release allows DeFenders to be installed and removed in seconds. A highly polished underside helps prevent dirt buildup and aids in cleaning. Fits 27.5” – 29” MTB tires up to 3” wide.
- QR fork attachment fits 19.6mm/26mm/27.7mm/35mm steerer tube (FX); QR seatpost attachment (RX)
- Two tone injected high impact resistant plastic
- Weight: 233 grams (FX); 226 grams (RX)
- Rear angle adjustable
- Size: 73 x 21 x 11 / 28.7” x 8.3” 4.3” (Front); 61 x 18 x 10 / 24” x 7.1” x 3.9” (Rear)

$13.00
Easy to install and available in various colors and designs, the Splash Pad Front Fender won't let wet weather spoil your ride. It's designed for use with a range of bicycle styles and compatible with suspension forks.
- A low-profile, easy-install fender that keeps riders clean in various conditions
- Fits wide range of wheel sizes
- Tool-free installation
- Zip ties not included. Color zip tie options available through Problem Solvers.

$13.00
Easy to install and available in various colors and designs, the MSW Splash Pad Rear Fender won't let wet weather spoil your ride. It's designed for use with a range of bicycle styles and is compatible with standard saddle rail configurations.
- A low-profile, easy-install fender that keeps riders clean in various conditions
- Fits wide range of wheel sizes
- Tool-free installation
- Zip ties not included. Color zip tie options available through Problem Solvers.

$11.99
- Guards against mud
- Made from 100% recycled plastic waste
- 100% recyclable
- Supplied with 4 zip ties
- Made in England

$13.99
Lightweight and stealthy, Muc-Off Ride Guards keeps mud fling to a minimum.
- Guards against mud
- Made from 100% recycled plastic waste
- 100% recyclable
- Supplied with 4 zip ties
- Made in England

$4.99
The Hardcore Fender Hardware Kits are compatible with select Hardcore fenders, Full Fenders, Hardcore Recumbent Fenders, and SpeedEZ fenders.
Includes:
- Rear fender plastic clip
- Fork and brake bridge-thru bolts
- Stay bolts and lock washers
Specific compatibility w/Planet Bike fenders:
- 35mm Width: 700c x 35mm Fenders (Hardcore)
- 45mm Width: 700c x 45mm (Hardcore, Full, and SpeedEZ); 700c Rear (Hardcore Recumbent)
- 60mm Width: 26-inch x 60mm (Full, SpeedEZ, and Hardcore)

$68.99
The VELOFLEXX mudguard set combines the stability of a fixed mudguard with the flexibility of a clip-on mudguard. The VELOFLEXX bridge allows the rear mudguard to be attached at the top of the seat stay with the use of rubber straps—no tools needed. This method of mounting doesn't rely on the cross stay where the caliper brake is usually bolted. At the front, the VELOFLEXX is mounted to the fork bridge with a rubberized hook-and-loop fastener or a cable tie. The black-coated stays provide even greater support.
- Compatible only with disc brakes
- Includes hook-and-loop fasteners and tension rubber
- Weight: 580g
- Max. outer diameter: 35mm
- Wheel size: 27.5" (650B), 28"
- Tire width: 52mm
- Length, front fender: 680mm
- Length, rear fender: 870mm

$16.99
This super-lightweight (45g) and discreet mudguard protects your face (and your fork seals) from mud and water. Made of super-soft material, it fits 26", 27.5", and 29" bikes and is compatible with most forks. Thanks to the included zip ties that wrap around the fork bridge and fork legs, the Flapguard sticks close to your bike even during extremely aggressive riding.
- Also compatible on rear side of frame

$51.99
S-BOARD
This smart clip-on front mudguard is for road, cyclocross, hybrid, gravel bikes, etc. Suited for maximum tire width up to 38mm, it is the ideal companion to our S-BLADE rear mudguard. Its smart, double-hinged, quick-release fitting system also fits aero forks. Paintwork protection film for the frame is included.
S-BLADE
The S-BLADE is the little brother of our top-selling X-TRA-DRY for the ambitious racing cyclist. With our quick-release mounting, the S-BLADE can be fitted on virtually any racing bike, and the angle setting can be optimally adjusted.
- Weight: 206g
- Wheel size: 650B – 28-inch
- Tire width: 30 – 38mm
- Length front fender: 390mm
- Length rear fender: 465mm

$24.99
No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it's longer and fatter than the regular X-tra Dry so it works great with 29ers and fatter 700c tires. It's also a breeze to attach with its easy-to-adjust seatpost mounting strap.

$100.00
Fender set with flexible spoiler
It doesn't get any longer than this: The BLUEMELS STYLE mudguard set with a flexible spoiler offers excellent all-around protection against splash water. Thanks to the flexible sandwich construction, in which extremely fine aluminum strips are embedded in a plastic coating, the mudguard is extremely robust, rigid, and protected against corrosion.
New V adapter with ESC security system
With its matt black surface and the black fastening components, the BLUEMELS STYLE also leaves nothing to be desired in terms of looks. The newly developed V-adapter with ESC safety system decouples the double U-struts when branches get between the spokes so that the wheel does not lock. Incl. accessories and struts.
- Aluminum/plastic sandwich construction
- With a flexible spoiler
- V-adapter with ESC safety system
- Stable double U-struts
- Made in Germany

$24.00 - $27.00
These clip-on fenders are designed specifically for fat bikes. They're extra-long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure.
- Extra-long and wide to accommodate the biggest tires
- Easy to install and fits virtually any bicycle

$59.99
Turn your bike into an all-weather vehicle with Planet Bike's Hardcore Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.

$59.99
IMPACT-RESISTANT CLEANERS FOR THE BIKE
Fender set made of robust sandwich construction
A really brilliant performance! The SKS BLUEMELS BASIC mudguard set not only integrates perfectly on the bike, but also reliably protects against dirt and splash water. Thanks to the flexible sandwich construction, in which extremely fine aluminum strips are embedded in a plastic coating, the fenders are extremely robust, rigid, and protected against corrosion.
Stylish driving fun with a safety system
With its glossy black surface and black fastening components, the BLUEMELS BASIC also leaves nothing to be desired in terms of looks. The ESC safety system ensures that the struts are decoupled if branches get caught between the spokes so that the wheel does not lock. The V-struts with fixed bridges guarantee an individual adjustment, the bottom bracket cut-outs make assembly possible even in tight spaces. Includes accessories and struts.
- Aluminum/plastic sandwich construction
- V-struts with fixed bridges for flexible adjustment
- ESC safety system
- Bottom bracket cutouts
- Made in Germany
- Wheel size: 20"
- Tire width in inches: 1.2"-1.8"
- Tire width in mm: 30-54mm
- Front mudguard length: 500mm
- Rear mudguard length: 800mm

$54.99
Planet Bike's SpeedEZ Fenders keep you dry in wet weather and are easily removed when the sun comes out. Made from nearly indestructible Superflex polycarbonate and rustproof stainless-steel stays, these fenders also utilize a clever, pre-installed attachment system so you can mount and remove them in seconds.

$69.00
Made of durable polycarbonate and featuring the highest quality hardware of any fenders in their class, Portland Design Works' Poncho Fenders keep you safe from spray from head to toe. They use thick 6mm stays for extra rigidity, sturdy rubber mudflaps for extra coverage, and front safety release tabs to ensure your wheels keep turning even if debris gets lodged between the fender and tire.
The Road size Poncho Fenders will fit close clearance road bikes with 700x23 tires maximum or road bikes designed to take fenders with up to 700x25 tires. They are designed to fit under caliper brakes and forks, and include add-on mounts for bikes that lack eyelets.
- 30 mm wide to fit 700x23 tires maximum
- Pre-installed stays and brackets for faster mounting
- Weight: 454 g (16 oz)
- Lifetime PDWarranty
The City size Poncho Fenders are designed for touring and CX bikes with 700x35 tires maximum. They come with all necessary hardware to mount to bikes with brazed on eyelets.
- 45 mm wide to fit 700x35 tires maximum
- Pre-installed stays and brackets for faster mounting
- Weight: 567 g (20 oz)
- City size installation manual (PDF)
- Lifetime PDWarranty

$30.00
The Grunge front fender was made for your messiest dirt adventures. It's super durable and provides exceptional coverage from mud, crud and spray. Its 3.4-inch wide profile and innovative steer tube mounting system will work on most suspension and rigid forks.
- Durable all-weather polypropylene blade
- Mounts to most suspension and rigid forks
- Includes hardware to fit small, standard and oversized tapered steerer tubes (18.5-34.5mm ID)
- Eyelets Required?: No
- Wheel size: 26", 650b, 29" and 700c
- Dimensions: 85mm wide x 600mm long
- Max tire width: 2.1"
- Weight: 160 grams

$49.99 - $60.00
Turn your mountain bike into an all-weather vehicle with Planet Bike's Hardcore Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.

$50.00
If you ride bent, Planet Bike's recumbent fenders keep you covered when Mother Nature rains on your ride. They are designed for non-tradtional bike and trike setups. Their clean lines and rugged aluminum construction provide great protection from rain, road grit, and other tire spray.
- 6061 aluminum blades
- Stainless steel V-stays and hardware are pre-installed and disc brake compatible
- 100mm mudflaps for extended coverage
- Release Tabs on front fender for added safety
- Eyelets Required?: Yes
- Wheel size: 20”
- Max tire size: 20" x 1.5" (50mm) / 20" x 1.9" (60mm)
Page 1 of 3
Next page