- Optimum Power Transfer - Best Balance For Lighter Weight (-7G) And Efficiency - New Designed Crank Arm - Maintains High Rigidity And Reduces Weight - Hollowglide - 4-Arm Construction Crankset - Adapted For Race Specific Disc Brake System - Shorter Length Of Rear Center With O.L.D. 135mm - Redesign The Gear Teeth Profile To Fit Wider Gear Pitch - 50-34T/53-39T/54-42T/55-42T/52-36T - Iconic Design - Chain Line: 43.5
Origin-8's Trackstar Crankset is made of light and durable forged aluminum and features a stylish machined-aluminum 46-tooth 1/8-inch chainring for excellent power transfer on the road and track.
Surly's Offset Double Crankset is designed specifically for bikes running very large tires and rims, such as Surly's Moonlander and/or Pugsley. The offset helps prevent chain rub on the tire. The crank is made of forged and machined 7075 aluminum, is 9- and 10-speed compatible and comes with 22- and 36-tooth 5-bolt chainrings. A precision Enduro bearing-equipped English-thread bottom bracket is included, so this versatile crankset is ready to spin.
Dimension Cyclocross Arm Sets made of 6061-T6 aluminum. - Forged AL-6061-T6 - BB Not Included - Chainrings Not Included - 110/74 BCD - Drivetrain Speeds: 10, 9, 8 - Number of Chainrings: Double - Pedal Spindle: 9/16-inch - Spindle interface Type: Square Taper JIS - Weight: 590g
Campagnolo's Record Pista Crankset gives you amazing power transfer for the toughest sprints. If your days are spent dreaming of velodrome glory, then make sure you have the crankset that can get you there.
Campagnolo is all about drivetrain evolution, and their Chorus Crankset proves it. The full-carbon cranks and 4-arm spider feature a unified bolt pattern that allows for all three chainring standards. This design incorporates an 8-bolt pattern with a spider arm that not only holds the chainring in place by way of the bolt, but also supports the chainring to increase system rigidity. The crank arms and spider are hollow for maximum stiffness and minimal weight. The integrated Ultra-Torque spindle joins the crankset together via a toothed Hirth joint in the center. - Chainring BCD: Campagnolo 146 Asymmetric, Campagnolo 112 Asymmetric
$620.00 - $710.00
Campagnolo's incredible Record Ultra-Torque Crankset sports a unique, integrated spindle that joins the two sides of the crankset together via a toothed Hirth joint in the center. Campy's ultra-smooth bottom-bracket bearings are included and fit into outboard cups (sold separately). The aesthetically striking design provides incredible stiffness, while Campagnolo's standardized BCD (145/112mm) allows for multiple chainring sizes. Plus, the Record chainrings sport special pins and plating for fast, silent shifts and long life. - Chainrings included: Yes - Drivetrain speeds: 11 - Number of chainrings: double - Spindle interface: Campagnolo Ultra-Torque
$870.00 - $985.00
The road steepens, but instead of slowing down, you push harder on the pedals and fly up the hill as all of your power turns into speed thanks to your Campagnolo Super Record Ultra-Torque Crankset. It sports a unique, integrated titanium spindle design that joins the two sides of the crankset together via a toothed Hirth joint in the center. And for ultra-smooth pedaling, the crankset comes with ceramic bottom-bracket bearings that fit into outboard cups (sold separately). The aesthetically arresting design provides incredible stiffness, while Campagnolo's unified BCD (145/112mm) allows for all 3 chainring standards. Plus, the Super Record chainrings sport special pins and plating for fast, silent shifts and long life. - Chainrings included: Yes - Drivetrain speeds: 11 - Number of chainrings: Double - Spindle interface type: Campagnolo Ultra-Torque
The design of the four arm carbon fiber cranksets that so well identify the Super Record, Record and Chorus groupsets has also found its way into the fantastic Campagnolo Potenza 11 drivetrain, albeit in an aluminum construction. The Potenza crankset is made with both left and right crank arms in hollow forged aluminum to keep weight to a minimum while maintaining the same performance characteristics of its carbon fiber counterparts. Potenza’s four arm spider design makes for one single crankarm for all chainring options thanks to its unified bolt pattern which allows for all three chainring standards 53/39, 52/36 and 50/34 to be built upon the same crankset. Changing between compact and standard with the Potenza groupset is as easy as changing eight bolts and two chainrings. While the 4-arm bolt pattern offers advantages in terms of practicality, the Campy Tech Lab designed it primarily with performance characteristics in mind. The eight bolt pattern with a spider arm design that not only holds the chainring in place by way of the bolt but also supports the chainring and in doing so, increases system rigidity to the point of surpassing its direct competitors in laboratory tests. -Double standardized bolt circle diameter allows for use of standard, mid-compact and compact chainrings -Power-Torque system have drive-side bearing pre-installed. The non-drive bearing comes pre-installed in the bottom bracket cup -Power-Torque Plus system utilizes a self extracting crank bolt for easy disassembly -Requires use of Power-Torque bottom bracket cups -Features Campagnolo X.P.S.S. (eXtreme Performance Shifting System) featuring geometrically optimized chainring teeth. Optimized when mated to a full Campagnolo drivetrain -Power-Torque system uses a single piece axle fixed to the drive-side crank arm which allows for simplicity and a light weight and rigid axle
$225.00 - $250.00
Many top features are packed into the Centaur crankset. The four-arm design allows for independent bolt circles, offering greater stiffness and structural integrity, and also provides additional versatility, as a single crankset is compatible with both standard compact and semi-compact chainrings. Add these features to the first aluminium crankset with an Ultra-Torque axle and the result is a component that is very similar to the top-of-the range part. - Requires use of Ultra-Torque bottom bracket cups-Double standardized bolt circle diameter allows for use of standard, mid-compact and compact chainrings - Ultra-Torque axles couple together in the middle of the BB shell via a Hirth Joint that self centers the crank. This results in a very light weight and stiff system that transfers power to the pedals without power loss - Features Campagnolo X.P.S.S. (eXtreme Performance Shifting System) featuring geometrically optimized chainring teeth. Optimized when mated to a full Campagnolo drivetrain - Ultra-Torque system have both drive and non-drive side bearings pre-installed
Designed specifically for use with H11 groupsets. Full Carbon crank arms and spider are hollow for maximum stiffness and minimal weight. Utilizes USB ceramic ball bearings. Light weight hard anodized alloy chainrings and alloy chainring bolts. Utilizes Campagnolo's Ultra-Torque crank system. - Ultra-Torque axles couple together in the middle of the BB shell via a Hirth Joint that self centers the crank. This results in a very light weight and stiff system that transfers power to the pedals without power loss - Features Campagnolo X.P.S.S. (eXtreme Performance Shifting System) featuring geometrically optimized chainring teeth. Optimized when mated to a full Campagnolo drivetrain - USB ceramic bearings increase smoothness and decrease rolling resistance, weight and the need for maintenance. USB bearings are 50% smoother than standard Campagnolo bearings - Ultra-Torque system have both drive and non-drive side bearings pre-installed - Double standardized bolt circle diameter allows for use of standard, mid-compact and compact chainrings - Required for use with H11 Ergopower shift levers, the crank spider is shifted outward to adjust for 135 and 142mm hub spacing while maintaining the Q-Factor - Requires use of Ultra-Torque bottom bracket cups
Race Face Crank Arm Tab Spacers • Spacers are used to protect the outer chainring tabs and enhance aesthetic when no outer ring or bashguard is used • Fits all Race Face cranksets • Use double bolts
Race Face aluminum Torx chainring bolt/nut set for double and triple chainrings. Includes four bolt sets.
Race Face aluminum Torx chainring nut/bolt set for triple chainrings. Includes four nut/bolt sets.
Replacement crank bolt/puller set for Race Face NEXT XC, SIXC, and 2088 and newer Deus cranks.
The Race Face Atlas crank is the burliest alloy CINCH offering; designed to excel across many disciplines including trail, enduro, DH and freeride. Featuring the versatile CINCH interface for interchangeable spiders, limitless ring combinations, a 30mm alloy spindle and compatibility across all relevant frame standards. - Forged 7050 aluminum alloy arms - Bracing matrix at the back of the crank arms for added stiffness - Industry standard 30mm spline interface - Removable spider offers the ability to convert between existing chainring standards while remaining flexible to future developments - Interchangeable spindle option of the Cinch system allows you to use the same crankset with 68/73mm and 83mm frames, as well as the RF BMX spindle and spider - Spindle diameter: 30mm - Direct mount chainline: 48.5, 55mm (Flipped) - 2X Cinch spider chainline: 47mm - Boost 2X Cinch spider chainline:50mm - Weight: 690g
Race Face Crank Spiders allow a quick swap between chainring options on the Race Face CINCH crank system. - Additional reinforcement compared to standard CINCH spider for DH and freeride applications - BCD: 104mm
Trail riding can be tough on your gear. The ends of your Next SL G4 cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!
The Turbine continues setting the benchmark for performance aluminum cranks and cements the Turbine legacy. Featuring the proven Race Face Cinch System interface, the Turbine is an incredibly light & stiff performance crank-set for today's modern XC, trail and all-mountain rider. Imagine interchangeable spiders, limitless ring combinations, a 30mm alloy spindle and compatibility across all relevant frame standards. Interested in counting watts? The Turbine crankset is compatible with the new CINCH Power Meter. Quite possibly the most versatile crankset you will ever own. - Deep pocket forged and CNC machined aluminum crank arms - Compatible with the Race Face CINCH Power Meter - Removable spider offers the ability to convert between existing chainring standards while remaining flexible to future developments
$79.99 - $89.99
Spindle and hardware kit for Race Face CINCH MTB and fatbike cranks.
$46.00 - $49.00
TruVativ's Stylo All Mountain Guard is all-mountain chainring protection with style. This 4mm thick aluminum guide is 4 bolt, 104 BCD compatible.
However you want to brand it, pedal-heavy outings with rowdy all-mountain shredding can be very demanding on cranks. That’s why Race Face took elements from their SixC designs and incorporated them with the best of Next to make an aggressive ruckus ready crank that can take you to the EWS podium. Light and strong where it matters most. Racing time or just rallying with friends, feel free to get a bit more sideways with Next R. - Manufactured from UD Carbon with matte clearcoat - Handmade in Canada - Downhill rated SixC G2 Pedal Insert for increased Rally Factor - Burlier 7050 alloy spindle - Cinch technology for game-changing compatibility
Shimano's CX50 Crankset features lightweight, hollow-forged aluminum arms and two-piece construction for high-efficiency power transfer to get you through the mud and on the podium. The 36/46 chainring setup is a 'cross friendly combination, and Shimano's wide pitch crank design eliminates chain rub in cross-gear situations. SG-X chainrings boast the shift-at-will performance Shimano is known for.
$269.99 - $279.99
Shimano Ultegra R8000 crankset. - Optimized lightweight crank arm design produces excellent power transfer efficiency - Minimized weight without sacrificing stiffness - Hollowtech II - Rider tuned gear performance through various gear combinations - Possible to choose the best choice for ride - Redesigned FC for greater frame compatibility - Wider gear pitch increases clearance between chain and leading teeth to provide compatibility with frames with O.L.D. 135mm and 410mm chain stay length - Model Number : FC-R8000 - Series: Ultegra - Crank Construction: Hollowtech II - Crank Arm Length : 165, 170, 172.5, 175mm - Bottom Bracket : SM-BBR60/SM-BBR60-PB - Chain Line: 43.5 - Average Weight: 690 grams (53-39T), 681 grams (52-36T), 674 grams (50-34T), 668 grams (46-36T)
For maximum pedaling efficiency, Shimano's 105 Compact Crankset boasts light, strong and stiff hollow, cold forged-aluminum arms, plus an integrated oversize-steel axle. The compact chainrings are also made of cold-forged aluminum and are ramped and pinned for quick, precise shifting.
Shimano XTR Left Crank Arms - Spindle Interface Type: Hollowtech II
True competitors are always looking for a performance advantage—a relentless pursuit of equipment that is lighter, stiffer and stronger. To create the best drivetrain possible, SRAM started with a completely reengineered crankset design. SRAM's XX1 Eagle crankset is the lightest, stiffest and strongest on the market. A special hollow internal architecture, combined with SRAM's proprietary CARBON TUNED lay-up, allows us to build a lightweight and ultra-energy-efficient crankset perfectly suited for the high-wattage output and smooth style of cross country riding and racing. Teamed up with their Eagle direct mount chainring, and as an integral part of the Eagle drivetrain, the XX1 Eagle crankset puts more focused power into every ride.
Lightweight, durable, stiff and designed specifically to work with Bosch and Brose mid-ship motors, SRAM's EX1 crankarms are purpose built for the high-torque E-MTB environment. - Proven SRAM technologies adapted for the demands of midship-motor E-MTBs - Compatible with Bosch, Brose and Yamaha bottom bracket interfaces - Arm Material: Aluminum - Colors: Black - Bottom Bracket Interface: ISIS
$102.99 - $116.99
- Series: SORA - Crank Construction: 2-piece crank construction - Bottom Bracket: BB-RS500, BB-RS500-PB - Chain Line: 43.5 - 9-speed - Four-arm BCD
$13.99 - $20.00
• Square taper interface • Only includes left crank
Page 1 of 11 Next page