Brakes/Levers/Pads

- Works well as a rear brake where the Neo-Retro may cause heel clearance problems - Compatible with drop bar levers and short pull mountain bike levers - Sealed pivot system with adjustable spring tension and Kool Stop pads - Recommended for standard pull (not linear pull) brake levers - Made in USA

- Mini-v brake for use with standard short pull (road) brake levers - Direct pull cantilever brake is simpler to install than a traditional cantilever brake and gives a narrow profile - Short curved arms give plenty of clearance for cyclocross tires or wide fenders - Spring tension is independently adjustable for each arm, so the brake can be precisely centered on the wheel and adjusted for return strength - Simple pivoting quick release on one arm makes it easy to open the brake to remove a wheel - Made in USA

For use with 2000+ Hayes 74mm eye-to-eye calipers (adapters/calipers for 22mm mounts are no longer available) - (IS) International Standard 51mm tabs; (QR) Quick Release; (TA) thru-axle - Note: Fox-36/40 (thru-axle), Rock Shox Pike (Maxle), and Psylo (Tullio) axle forks use IS-QR adapters

- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts

- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts

- Cold-forged 6061-T6 aluminum arms, available in 85mm or 108mm - Precision sealed bearing pivots, titanium and stainless steel hardware - Flexible cable noodle and streamlined cable fixing point - 35 millimeters of vertical brake pad adjustment

- Prime 2-piece rotors are for Prime Pro and Expert brakes only - L-series, lightweight one piece rotors - V-cut profile steel rotors for optimum weight-to-performance ratio. Increased surface area over previous designs increases power while cutouts and drillings help keep pads clean - Rotors includes: (1) 6-bolt/44mmBCD rotor, (1) Torx wrench, and (6) T-25 rotor mounting bolts with thread retaining compound - 205g @ 203mm

MisMatch adaptors allow users to mount Shimano & SRAM brakes and shifters on one clamp. Available in multiple configurations. Annodized Black Attaches Shimano I-Spec II shifters to SRAM MatchMaker brake lever clamps

Jagwire's Cross Pro Brake Pads use a combination of mountain and road brake-pad technologies for excellent speed control, stopping power and durability so they're ideal for cyclocross use. These brake pads are cartridge style for easy pad replacement without losing your brake shoe adjustment. And there are wheel guides to make wheel installation faster and easier. The Cross Pros are available in threaded or threadless (post-mount) versions to fit most bicycles.

If you believe in better performance then you should believe in hydraulic road (HydroR) brakes. SRAM's award winning HydroR technology is the fulfillment of the promise of better braking, more control, and improved performance in all conditions. SRAM RED is delivering on the promise of braking confidence and security that brings speed control and stability to a new level. - RED ergonomics including Reach Adjust - SRAM Road 11-speed compatible - Optimized power and modulation for higher speeds and more control - Refined lever body design is more comfortable - Easy access bleed port means convenient service - Shift paddle design is lightweight and offers improved finger clearance - Moto-style means this is a right-side (rear) shifter with a front brake, the reverse of the normal American-style. - Front brake hose length is 950mm, rear brake hose length is 1800mm

Cost effective stopping power from the leader in cable-actuated disc brakes. - For use with short cable-pull levers - Mono-block caliper design has outboard pad adjustment - Spring tension is adjustable - Caliper has 74mm mounting bolt spacing; mounting adaptors are sold separately - Brake Caliper Type: Post Mount - Brake Lever Actuation: Short Pull - Rotor Included: No - Weight: 215 g

Hose fittings for Hayes hydraulic disc brakes

Need a replacement line for your Avid hydraulic disc brakes? You're covered with Avid's Hydraulic Line Kit. It's got 2000mm of hose for front or rear application, and all the fittings to work with your brakes.

Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.

Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder

Replacement pads for Hope E4 hydraulic disc brakes.

SRAM's Force 22 Hydraulic Disc Brake and Brake Lever is descended from their top-end RED road group and represents SRAM's attempt at perfecting braking performance. A carbon brake lever with an aluminum shift lever delivers precise modulation and shifts while keeping the weight impressively low. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust. The forged aluminum disc caliper itself is optimized to give you the stopping power and modulation you need for road and cyclocross riding. A fully-sealed hydraulic system prevents contamination during muddy cross races or epic dirt-road slugfests. Once you experience the incredible ability of SRAM's Force 22 Hydraulics, you'll never go back to rim brakes again!

Slip Avid's Rim Wrangler 2 Brake Pad Inserts into your Rim Wrangler 2 cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze. They're designed for use with linear-pull brakes.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Disc brake adaptors designed to mate Magura disc brakes with a variety of frame mounts and rotor sizes. - Includes hardware to mount adaptor to frame

- Simple, robust, powerful brake for riders who prefer to work with Mineral oil. - The lever is designed with proven lever technologies and features easy adjustment access and superior ergonomic comfort. - The caliper is based on the Code downhill brake and utilizes the same pads. - Post-mount. - Designed for use with Maxima Mineral Oil only.

Magura Storm SL.2 Rotor - 6-bolt silver The Storm SL.2 disc brake rotor combines minimal weight with excellent braking performance. Perfect for sporty use.

Magura type 3. 1 performance pads for louise 2002-6 and louise fr - Performance series disc pads feature a soft, organic compound with excellent power, heat management, and modulation. - Steel backing plate

Magura MT Sport Disc Brake Caliper black - 0-degree tube connector - Includes brake pads

Magura Storm CL Disc Brake Rotor - Centerlock with lockring for thru axle

Magura hs33/hs11 compression sealing washer bag of 20 - Small parts used to install hydraulic hose for Magura disc brakes. - Compatible with Campagnolo H11 brake/shift levers

Disc brake caliper assembly - (assembled, no hose) diffusion black ano - minteral fluid brake - db8 (a1)

Cover kits for Magura brake levers.

Clamps for mounting Magura disc brake levers to the bar. Does not include mounting hardware, clamp only. - Sold individually

Shiftmix adaptors allow a shifter to clamp directly to a Magura brake lever, expanding setup possibilities.