Bottom Brackets

$35.00
Campagnolo's Record Bottom Bracket Cups are perfect for your Campy Ultra-Torque crankset (sold separately). They are constructed from anodized aluminum for light weight and excellent durability. They are available in English and Italian thread.
• Italian: 70mm
• English: 68mm

$35.00
- Adapters press directly into specific PF30, BB30, BB86 or BBright frames and allow the use of standard Ultra-Torque (UT) crank sets and EPS components
- Updated design increases surface area contact with the frame's bottom bracket, reducing the possibility of noise from frames with slight imperfections
- Ultra-Torque OS Fit BB-cup tool is required for adapter installation

$38.00
Campagnolo's Power-Torque Bottom Bracket Cups are perfect for your Campy Power-Torque crankset (sold separately). They are constructed from anodized aluminum for light weight and excellent durability. They are available in English and Italian thread.
• Italian: 70mm
• English: 68mm

$75.00
Features three sealed cartridge bearings.
- Fits Daytona, Racing Triple, Centaur, Veloce and Mirage, 1193 and later Athena and pre-1995 Record and Chorus
- 115mm spindle recommended for triple cranks and 32 or 35mm seat tubes
- Unique taper is not compatible with Shimano
- Weight: 233 grams

$110.00
Compatible only with Record or Chorus square taper cranks. Features three cartridge bearings and a chromoly steel spindle.
- 3 sealed cartridge bearings, 2 on the drive side, 1 on the non-drive side
- Removable cups are machined from 7000 series aluminum
- Unique taper is not compatible with Shimano
- Weight: 220 grams

$110.00
Campagnolo's Record Pista Bottom Bracket is a masterpiece of refinement thanks to its gossamer carbon/aluminum cartridge, easy-spinning bearings and lightweight aluminum cups.

$10.00
Dimension American bottom bracket for one-piece cranks.
- Include cups, bearings and cones
- 24 tpi

$25.00
Running a conventional threaded bottom bracket on your BB30 or PF30 frame doesn't have to be complicated. This press-fit adapter from FSA goes in snug and opens up a lot of crankset possibilities for your BB30/PF30 frame.
- Aluminum
- Allows conventional threaded bottom brackets to be installed in a BB30 or PF30 frame
- Install with headset press (not included) and green Loctite (included)

$35.99
This FSA Bottom Bracket allows you to run MegaExo and other 24mm spindle cranksets with a BB86/BB89.5/BB92 frame.
- Intended for road use
- Steel bearings

$40.99
There's precious little that's better than a fresh bottom bracket. This complete FSA BB30 Bottom Bracket contains 2 stainless steel bearings, 2 C-Clips, 2 dust covers, and 1 adjustment washer.

$47.00
- Extra-thick walled hollow CrMo spindle with Ti-Nitride coating
- Industrial cartridge bearings. 12mm steel crank bolts included
- Forged aluminum cups with lip on drive side.
- 280g

$49.99
- Road sets include bearings, shields, c-clips and wavy washer for bearing retention/tension
- Mountain sets include bearings, shields, c-clips and spacer
- Choose ceramic or stainless steel options

$50.00
- Left and right bottom bracket cups with standard bearings for FSA MegaExo cranks
- BB-9050 is for 24mm spindle 68/73mm MTB K-Force and Team Issue cranks
- BB-8681 for K-Force Light (a non-ceramic option) and SLK Light Road MegaExo cranks (BB-8681 bearing covers have been redesigned so that the spindle now rides directly on the bearing itself)
- BB-7000 is for 24mm spindle 68/73mm shell MTB Gravity Lite, Moto X and Afterburner cranks
- BB-7000 is for 24mm spindle 83mm shell MTB Gravity Lite cranks
- BB-6200 is for 24mm spindle 68mm shell Energy, Gossamer and Omega No Bolt Design cranks
- BB-6000 is for 24mm spindle 68mm shell Energy, Gossamer and Omega cranks
- BB-4000 is for 19mm spindle 69mm shell Omega cranks
- BB-1000 is for 19mm spindle 68/73mm MTB Gamma cranks
- 1.37" x 24tpi (English threads) or M36 x 24tpi (Italian threads)

$50.99 - $60.00
ISIS revolutionized bottom bracket spindles. Keep yours spinning smoothly with this Platinum ISIS Bottom Bracket from FSA.
- Forged, hollow chromoly spindle with titanium nitride coating
- Integrated, large ball bearing design
- Cold-forged aluminum cups
- Includes crank bolts

$54.99
Run your 386EVO crank with your frame that is designed for BB86 Shimano Pressfit bottom brackets with this FSA bottom bracket.
- 2 lines of bearings on each side

$54.99
- Enables the use of a MegaEVO (30mm spindle) crankset on a 68mm English threaded frame
- Compatible with Gravity Gradient MegaEVO 30mm cranks

$191.99
Featuring lightweight, low friction ceramic bearings and lightweight alloy cups, the FSA Light Mega Exo Ceramic Road Bottom Bracket keeps you spinning smoothly mile-after-mile with weight savings to create a highly efficient drivetrain.

$36.99
Designed to work flawlessly with your Patterson crank, this Metropolis bottom bracket delivers smooth performance and light weight.

$14.99
The Dynatron features an American BB with press fit cups and caged bearings.
- Compatible with 1-piece cranks
- Frame BB Shell is 68mm width by 51.5mm inner diameter
- BB Style: American

$130.00
The Problem Solvers Bushnell Eccentric Bottom Bracket is the industry leading design for chain tension adjustment on tandem and dedicated single speed bikes equipped with eccentric bottom bracket shells. The classic version features full-body, aluminum construction across the shell for maximum surface area friction and additional value.
- Accepts English threaded bottom bracket cups
- Classic, full-body design
- Outer Diameter - 54mm

$150.00
The Problem Solvers Bushnell Eccentric Bottom Bracket is the industry leading design for chain tension adjustment on tandem and dedicated single speed bikes equipped with eccentric bottom bracket shells. The classic version features full-body, aluminum construction across the shell for maximum surface area friction and additional value.
The Bushnell Fat Bike Eccentric Bottom Bracket is designed for the 100mm shells in most fat bikes.
- Accepts English threaded bottom bracket cups
- Classic, full-body design
- Diameter of part - 2.118 inches (53.78mm)
- Fits BB shells from 53.8 ~ 54mm I.D. without shim
- Fits BB shells up to 100mm width

$59.99 - $74.99
- Race Face bottom brackets for use with 30mm spindle cranksets in the Race Face CINCH crank family
- Includes inner plastic sleeve and spacer; additional BB fitments can be accommodated with CINCH spacer kits

$59.99
- Allow the use of a 24mm spindle with Shimano press fit shells
- Bearings races are fully coated for improved corrosion resistance
- Bearings are factory filled with Phil Wood grease

$38.00
Get more distance out of every pedal stroke with SRAM's BB30 Bottom Bracket Assembly. It features sealed bearings for a smooth pedal stroke and impressive reliability. Plus, it presses directly into your frame's BB30 bottom bracket shell for reduced weight and increased longevity.

$38.00 - $50.00
The SRAM DUB bottom bracket series has a simple job— to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility.
- Gutter Seal Technology drastically improves sealing against the elements
- Sealed cartridge bearings
- One oversized spindle to work across every bottom bracket standard

$38.00
The SRAM DUB bottom bracket series has a simple job— to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility.
- Gutter Seal Technology drastically improves sealing against the elements
- Sealed cartridge bearings
- One oversized spindle to work across every bottom bracket standard
- Significantly lighter than GXP system
Page 1 of 4
Next page