The all-new aluminum Sherpa 2.0 resets the standard for user-friendly adventure. Folding tire cradles create an abundance of clearance while Kuat's foot-actuated pivot lever lets you bask in the glory of carrying a bike or eating a breakfast burrito while unfolding your rack at the same time. With features designed around your lifestyle, this lightweight rack is as easy to take off as it is to leave on. - Re-designed pivot with optional foot assist - Semi-integrated bike lock - Front tire ratchet design with an intuitive release - Rear tire cradle features a co-molded strap to protect wheels - Folding front cradle adds space between rack and vehicle - No-tool install with hand tight hitch cam system - Gloss metallic powder available in 3 colors - Low profile arced design delivers an amazing look - 2 Bike capacity up to 40 lbs. each - Holds wheelbases up to 47-inch and tires as large as 3-inch - Increased spacing between bikes to 14-inch - Lightweight platform rack design as low as 32lbs (assembled) - Available in both 2-inch & 1.25-inch hitch sizes
Transport all types of bikes with Saris’ Freedom 4-Bike hitch rack. Its innovative design adjusts to fit most bikes and sizes, including kids’ and even some recumbents, thanks to the adjustability of its center upright supports. It uses quick-adjust trays and ratcheting straps to secure four bikes of up to 35 pounds each, and loading is made easy by the low tray height. The center upright supports even tilt down to allow trunk access.
Yakima's RidgeBack 2 securely transports two bikes with Yakima's cradles and their simple-to-adjust, ratcheting ZipStrips. Constructed of lightweight aluminum, this innovative hitch rack comes fully assembled out of the box for ease of use. Just plug it into the hitch, tighten and lock the SpeedKnob, and you're ready to load up the bikes! In addition to carrying traditional double-diamond frames with zero bike-to-bike contact, the anti-sway cradles are specially shaped to be compatible with non-standard and full-suspension frames. Plus, the Upperhand control lever allows the rack to fold down, away from back of your vehicle, for unimpeded trunk/hatch access, or when not in use, lets the RidgeBack fold flat for storage.
Thule's Snug-Tite Receiver Lock secures their T2, Doubletrack, Roadway, and Parkway receiver-type racks (also called "hitch racks"). Just insert the Snug-Tite in place of your receiver pin and the rack is locked in place.
With years of experience and feedback, Kuat overhauled every feature and streamlined the look while maintaining the spirit of its predecessor. A re-designed pivot system with foot assist will endure a lifetime of abuse. Adjustable cradles allow for fast bike fit adjustments. Individual bike cable locks are longer, more durable, and easier to use. Holds bikes with up to 4.8-inch tires ensure a true fit for any bike in your stable. Updated ratchet arm creates an intuitive release and a more stable tow. The ground-up re-design of the Trail Doc work stand delivers a pro level feel. These are only the highlights, resulting from 3 years of extensive development, making the NV 2.0 the most advanced hitch rack on the planet. - Adjustable front tire cradle system - Re-designed pivot with optional foot assist - Fully integrated cable locks - Trail Doc included - Front tire ratchet design with an intuitive release - Rear tire strap features a co-molded strap to protect wheels - No-tool install with hand tight hitch cam system - Premium gloss metallic powder with water transferred logos - Hitch lock included - 2 Bike capacity up to 60 lbs. each - Holds wheelbases up to 48-inch, and tires as large as 4.8-inch with use of the Phat Bike Kit - Fits 20-inch to 29-inch tires - Wheel adapter needed for 20-24-inch tires - Available in both 2-inch & 1.25-inch hitch sizes - Dedicated 2-inch model is able to carry up to 4 bikes with optional NV 2.0 Add-On
Thule's Raceway Platform 2 Bike rack perfectly marries the stability and security of a platform-style rack with the simplicity and ease-of-use that only a trunk rack affords. The two bike trays mean that your prized rides are rock solid and sway free as you drive down the road. Adjustable rubberized clamps keep the bikes separate, so they don't knock into each other. Thule's FitDial adjustment makes fitting this rack to your car a breeze, and when it's time to park the car, this rack folds down flat for convenient storage. The Raceway attaches to your vehicle with SureTight ratcheting locking cables for maximum security, strength, and ease of use.
Lightweight, durable, and portable—Kuat's Beta is no-frills and full of function. It features an anti-wobble cam at the hitch, and a anti-wobble adjustment at the arms for a locked-down, solid ride. Anti-Sway cradles keep your bikes in line for a smooth ride down the road. The 11-pound Beta folds flat, so you can stash it in the back of a car or behind the seat of a pickup and have it ready when you need it. Features • Carries 2 bikes (up to 40 lbs. each) • Total carrying capacity of up to 80 lbs. • Folds up quickly for storage • Tilts down for easy vehicle access • Enhance the Beta with hitch lock system (sold separately) • Hand-tight cam system - no need for additional tools! • Anti-sway carriages for a smooth ride • Aluminum construction is lightweight and extremely durable Specs •Weighs only 11 lbs •Available for 2" OR 1.25" receivers. The 1.25" Beta can fit either receiver with an adapter (sold separately).
What happens when you take the most popular trunk rack of all time and expand its vehicle compatibility by 20%? Spoiler Alert: you get the Bones EX. Cultivated in the mind of Italian designer Fabio Pedrini and brought to life in our Wisconsin-based facility, the Bones EX features a unique and game-changing leg. Featuring a leg that gracefully avoids contact with most plastic spoilers found on many of the best-selling sedans, hatch backs and SUVs, the Bones EX now fits 20% more vehicles than its legendary predecessor. And that’s not all. We’ve decked out the Bones EX with premium bike hold downs and a handy strap management system in a shade that never goes out of style. Product Features - Best fit around: fits 89% of the top vehicles sold, including those with spoilers. - VIP Treatment: premium bike hold downs that are easy to use and quick to load. - Clean, Sleek Look: integrated strap management eliminates flapping straps. - Strong & Rust-Free: injection-molded arms and legs keep the rack solid for years to come. - Carries 3 bikes (35lb/bike). - Has the largest vehicle compatibility of any trunk rack on the market – consult the Saris Fit Guide for approved fits. - Unique dog leg fits over most spoilers, including those on popular sedans, hatchbacks and SUVs. - Premium bike hold downs that are easy to use and quick to load. - Integrated strap management system provides clean look and eliminates flapping straps. - Best-in-class ratchet straps speedily fasten bike to the rack. - Strongest frame on the market. - Built with 100% recyclable materials. - Rust-free injection molded plastic. - Articulated rubber feet to protect paint. - Arc–based design separates bikes on different levels. - Patents issued and pending. - Lightweight at 11 lbs.
Premium platform hitch bike carrier delivers maximum strength, security, and user friendliness. - Easy to install and remove the rack with the tool-free AutoAttach system - Carrier easily folds when not in use and tilts away from vehicle for rear access due to the HitchSwitch lever - Lock bikes to the rack and secure the rack to the receiver with the integrated cable lock and lock knob - Eliminate bike interference by adjusting side to side to create generous spacing between bike mounts - Secure bikes quickly without frame contact with the frame-free ratcheting arm - Ideal for carbon frames, mountain, downhill, and fat bikes as it fits 20-29” wheels and up to 5” tires without adapters - Max number of bikes: 2 - Load capacity: 120 lb - Max bike weight: 60 lb - Dimensions: 54 x 15 x 43 in - Folded dimensions: 54.7 x 22.5 x 33.8 in - Weight: 51 lb - Distance between bikes: 12.5 in
$219.00 - $249.00
No hitch? No roof bars? Kuat Highline is the answer. Easily mount Kuat’s Highline to almost any vehicle. Perfectly at home hauling your machine to the local group ride or your families stable of bikes to the greenway. Rugged construction, smart user-friendly design, and sleek aesthetics make the Highline trunk rack a staple in any cyclist’s garage. The Highline has 2 or 3 bike options available and is constructed with lightweight and durable aluminum. Intuitive tray pivot design makes it a snap to prep for loading. Your bikes will be carried with the Highline’s exclusively designed cradles featuring integrated straps and anti-sway to keep your bicycle in place. An industry-first protective film is included with each Highline because we like your vehicle’s paint too.
Thule's Insta-Gater turns your truck bed into a stable, secure bike carrier. It mounts without tools because it's ingeniously held firmly in place by closing your truck's tailgate on the ends of the mounting straps. This unique bike rack accepts one bicycle with 20- to 29-inch wheels and up to 3-inch-wide tires. It's also easy and fast to mount your bike thanks to Thule's SecureHook that holds the bike by grabbing the front wheel. No frame contact is made. You can use more Insta-Gaters to carry more bikes.
Yakima's FourTimer hauls 4 bikes of virtually any style, from children's bikes to big DH bikes to fat bikes. • Transport four bikes regardless of frame design, suspension or wheel size • Ideal for fat bikes, kids' bikes, and fenders • Secures bike by the frame with padded arms • Low tray height for quick and easy loading and unloading of bikes • Folds down with bikes loaded for rear-of-vehicle access. Folds up when not in use • Easily converts into 2-bike carrier
When adventure calls, you need a hardy bike rack to get you and your collection of bikes there. That’s why Saris built the SuperClamp 4-bike from the ground-up to be the safest, toughest, and lightest 4-bike platform hitch rack on the road. It all comes down to its super compact design, with two bikes carried on a single horizontal bar. Plus, each bike rack undergoes unparalleled testing in the heart of tundra country – meaning, if it survives in Wisconsin, it will thrive wherever your compass leads. When it comes to durability, versatility and carrying capacity, the SuperClamp 4-bike packs a punch in its light, 63 lb package. In fact, the SuperClamp is 40% lighter than similar platform hitch racks, yet is guaranteed to last a lifetime thanks to its tough steel construction. Load it up with mountain bikes, electric bikes, kid’s bikes, road bikes, insert-any-bike-type-here bike, and the SuperClamp will carry them safely to their destination. No matter where your bike wants to go, the SuperClamp 4-bike is up for the challenge. - Rock-solid dual hooks provide unmatched security, and never touches the bike’s frame. - Brawny, yet lightweight – designed to carry two bikes on a single bar for a footprint that is both compact and able to carry up to 4 bikes of any type (190 lb total). - Load ‘em up! Crafted to haul a wide variety and combination of bikes. - Tilting feature allows access to rear of vehicle, even when fully loaded (your dog will thank you), and folds up when not in use. - Functional, eye-pleasing design that looks good on any car and features integrated locks, reflectors and of course - a bottle opener.
Saris' Protect-O-Pads are foam blocks that separate and protect your bikes when multiple bikes are being transported. They come in packs of four.
The arch is arguably the most important engineering feat in human history. One look at Saris’ Bones 2-Bike rack would make any ancient Roman proud. With three incredibly strong, arched leg mounts and two arched arms, you can rest assured that your bike is in solid hands. Six highly adjustable straps, each equipped with soft coated hooks, hold the rack down, while the three legs have grippy rubber feet to provide a sturdy base. Ratcheting anti-sway straps ensure a tight grasp on your bikes. The Bones is made out of 100% recyclable, non-rusting parts and fits almost all vehicles—even those with spoilers.
Saris’ Bones 3-Bike rack unites utilitarian strength and modern style. Crafted of incredibly strong, injection-molded plastic, the four arched leg mounts and two arched arms cradle your bikes on different levels to minimize unwanted handlebar and seat contact. Six highly adjustable straps, each equipped with soft, vinyl-coated hooks, hold the rack down, while the four legs have grippy rubber feet to provide a sturdy base that won't harm your vehicle's finish. Ratcheting, soft-touch, anti-sway straps ensure a tight grasp on your bikes. The Bones is made out of 100% recyclable, non-rusting parts and fits almost all vehicles—even those with spoilers. Plus, it folds fast for easy portability and storage.
The ForkLift is one of Yakima's most versatile fork-mounted roof racks. It boasts square, round and direct-to-factory crossbar capability right out of the box. It also features quick and easy tool-free installation, a sleek design and a smooth, automotive finish that looks great on any car. The easy-to-adjust sliding wheel tray makes positioning the rear wheel a snap and it’s compatible with most disc brakes.
Easy to mount and a cinch to store in the back of your car, Saris’ Solo is a low-profile rack for peace-of-mind convenience. Solo’s uni-body frame has no adjustable parts, which makes it a no-brainer to set up. With its soft, rubber, pivoting feet and four hold-down straps, the Solo safely and securely attaches to your car. Two strong buckles and an integrated anti-sway strap keep your bike in place. As an added bonus, the Solo is built with 100% recyclable, non-rusting materials.
Thule's Spare Me rack bolts onto the mount for your spare tire and securely carries two bicycles (total weight up to 75 pounds). It has Thule's Stay-Put cradles that protect your bikes and boasts an anti-sway design to keep your bikes from swinging together or hitting your vehicle. The arms fold down when not in use. An integrated locking cable and locking knob make it easy to secure bikes to the carrier and the carrier to the vehicle.
Go BigStack to go big! Mount up to 4 boats on your roof, or use that room for other gear for a multi-sport adventure. HullGuard padding keeps your boats safe and universal mounts fit nearly any shape crossbar. - Folds when not in use for better aerodynamics - Tool-free installation Fits Yakima round, square, factory, and aerodynamic bars - Top-of-the-line Hullguard padding keeps your boat protected during transport - SteelCore construction uses a steel tube frame for superior strength - Integrated ramp system makes it painless to load your boat - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs Integrated bottle opener - SKS Locks sold separately - Minimum crossbar spreads of 24 inches\u001D or more
The Bones Hitch 4-Bike rack is born out of the design and function of Saris' best-selling Bones rack and brought to life in the form of a hitch rack. You wanted a nicely designed, tilting rack at a great value, and you wanted it to be lightweight. The result is the Bones Hitch. The Bones Hitch is one of the lightest racks in the marketplace yet every bit as strong and durable. That's why Saris backs it—along with all of their racks—with a lifetime warranty. Stylish, lightweight, easy to use and made here in the USA—who says you can't have it all? - Carries 4 bikes, up to 35 pounds each. - Preassembled in box. - Rack tilts down with pull of handle for easy access to rear of vehicle. - Coated hold-downs and anti-sway straps provide soft-touch protection to secure and stabilize the bikes. - Fits 1-¼-inch or 2-inch hitches out of the box. - Lifetime warranty. - Made in Madison, WI. - Injection-molded arms are strongest in the market. - Arms fold up and down with ease for quick storage and easy loading. - Welded steel mainframe. - Hitch lock sold separately (Model 3022). - Lightweight, steel construction weighs only 20 lbs.
Transport all types of bikes with Saris’ Freedom 2-Bike hitch rack. Its innovative design adjusts to fit most bikes and sizes, including kids’ and even some recumbents, thanks to the adjustability of its center upright support. It uses quick-adjust trays and ratcheting straps to secure two bikes of up to 35 pounds each, and loading is made easy by the low tray height. The center upright support even tilts down to allow trunk access. Plus, the rack itself only weighs 21 pounds, making it easy to take on and off.
Thule's Gateway rack gets you on the road fast and worry-free. Thule's easy-to-use FitDial offers a perfect fit and quick installation on a huge variety of vehicles. Long arms provide clearance over spoilers, Hold Fast cradles with anti-sway cages protect your bike’s finish, while molded pads protect your car's finish. The Gateway fits all different types of bikes thanks to the Cinch Lever that allows the bike arms to adjust independently. Plus, the Gateway folds flat for easy storage.
Always forgetting the thru-axle adapter for your roof rack? Kuat solved that problem for you: The TRIO can handle almost any bike you own. The unique mounting system fits quick release as well as 15mm and 20mm thru-axles. It will even play nice with fat bikes with the optional adapter kit (sold separately). The TRIO mounts to most factory and aftermarket crossbars and features an integrated cable lock. - 1 Bike Capacity (45 lbs max) - 3 Way Mount-Fits 9, 15, & 20 mm forks out of the box - Optional adapter kit for fat bikes (sold separately) - Mounts to most factory & all aftermarket cross bars - Integrated Cable Lock (locks both frame and rear wheel) - Sliding rear tire strap - Up to 4 feet between cross bars. - Max crossbar size-3.5” wide by 1.7” thick - Weight-7 lbs - Dims-56” x 4” x 1 3/8”
Use Yakima's LoadWarrior Stretch Net to secure and control loads on the LoadWarrior rooftop cargo rack (sold separately). The multi-hook design is versatile and easy to use.
Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. Plus, they're coated to protect your vehicle's finish. Select the right model Q Clip for your vehicle using Yakima's rack configurator.
Yakima's Universal Mighty Mounts are a simple way to install Yakima accessories on your car's factory racks. The universal design fits almost all factory crossbars.
Yakima's BedHead offers an affordable, no-drill solution for carrying a bike by its fork in the bed of your truck. Durable and corrosion-resistant, the BedHead quickly installs onto the interior lip of your truck bed's rail as shown. A beefy, long-throw (so you don't have to unscrew it to install the bike) 9mm-diameter skewer holds your bike fast. Padding protects your truck’s finish, too.
Step up to the completely new Yakima bar. Thoroughly wind tunnel tested, the black JetStream’s JetFlow design is exceptionally aerodynamic, incredibly strong, lightweight, and really quiet on the move. The root of a modern rack system, it carries a lot and looks good doing it. - Wind tunnel tested JetFlow™ teardrop shape is strong, quiet and exceptionally aerodynamic - Seamless extruded aluminum construction is light, strong and sleek - JetTruss™ internal support engineering adds serious strength - Materials and construction create a durable bar designed for years of use - T-slot with SmartFill™ push-down infill for easy mount attachment and efficient airflow - JetStream Black - powder-coated alloy finish and high-gloss polymer end caps - JetStream Silver - clear anodized alloy finish and high-gloss polymer end caps - Available in 3 sizes; SM (50”), MD (60”) and LG (70”)
A straight-forward, easy-to-use, locking QR skewer that fits any fork-style bike mount on the market. Compatible with any 9mm x 100mm axles. - Durable stainless steel axle and body - Easy-to-adjust end nut and cam lever - Lockable with SKS lock, sold separately
Pair of EndCaps for Yakima JetStream bars.
A strap rack that hits the sweet spot where functionality, durability, simplicity and good looks come together, the HalfBack 3 is designed for riders who like to grab their bikes and go. Install is simple, loading and unloading is a piece of cake, bikes ride securely, and a built-in bottle opener opens bottles. - SuperCush ZipStrip cradles secure the bikes and make loading and unloading a breeze - ZipStrips secure bikes to the rack and are fully removable - Modern design delivers an improved fit and looks awesome - Bomber external frame holds tough, cushy padding protects your paint - Simple installation with an interlocking HUB that aligns key adjustment points - Four-strap attachment is intuitive and easy - Compact for easy storage - Yakima signature bottle opener lets you enjoy a post-ride cold one - Number of Bikes: 3 TECHNICAL SPECS - Weight: 22.00 lbs - Dimensions: L 30.00” x W 29.00” x H 22.00”
$60.00 - $75.00
Thule's Thru-Axle Adapter allows you to carry bikes with through-axle front forks on Thule and most other fork-mounted bike carriers.
Kuat's Transfer 2 offers all the Kuat quality you'd expect at a price that appeals to privateer racers and weekend riders alike. It fits both 1.25 and 2-inch trailer hitches and its stout steel construction won't leave you hanging, or your precious cargo bouncing around on the road. Bikes mount securely and easily with an adjustable locking arm and wheel tray. Best of all, there's no contact with the frame so your bike will come off the rack looking just as good as when you put it on. The wheel trays hold up to a four-inch-wide tire and the rack holds bikes with wheels anywhere from 20 to 29 inches.
Thule's versatile Low Rider is a handy bike mount that you can install in your vehicle, pickup truck bed or on virtually any flat surface. It features a sturdy 9mm-diameter quick release to securely support your 2-wheeler by its fork. Made of heavy-duty metal for strength and reliability, the Low Rider boasts a pass-through hole for locking your rig with a cable lock, too.
Yakima's Locking Brackets replace two of the regular mounting brackets that come with your MegaWarrior and LoadWarrior luggage carriers so that you can safely secure these baskets to your crossbars. You get two Locking Brackets, Lock Cores and keys.
Product details: - Durable and flexible nylon adapters designed specifically for CORE and JETSTREAM crossbar shapes - Allows most RoundBar style mounts to attach in minutes - Tool free installation - Sold as a set of 4 - Compatible with HighRoller, Raptor, WheelFork, HullyRollers, Mako Saddles, KayakStacker, Multimount, Accessory Lock Housing, and Basketcase
$39.00 - $49.00
If it floats and fits on crossbars, these Crossbar Pads will help protect it. - Goes great with kayak stackers, heavy-duty straps, and strapthang
Fat bike skewer and thru axle tube adapters for the Küat Trio roof rack.
Thule's Gateway rack gets you on the road fast and worry-free. Thule's easy-to-use FitDial offers a perfect fit and quick installation on a huge variety of vehicles. Long arms provide clearance over spoilers, Hold Fast cradles with anti-sway cages protect your bike’s finish, while molded pads protect your car. The Gateway fits all different types of bikes thanks to the Cinch Lever that allows the bike arms to adjust independently. Plus, the Gateway folds flat for easy storage.
$39.00 - $59.00
Transfer cable lock kit including one locking cable per tray and a matching lock for the hitch pin.
Kuat's Transfer 3 offers all the Kuat quality you would expect at a price that's sure to please privateer racers and weekend riders alike. Sturdy steel construction won't leave your precious cargo bouncing along the road, and it fits both 1.25 and 2-inch trailer hitch receivers. It holds three bikes and the wheel trays fit tires up to four inches wide. Bikes mount securely with an adjustable locking arm and a deep, stable wheel tray. And, there's no contact with your bike's frame so your bike will come off the rack looking just as good as when you put it on.
Perfect for tour operators, group rides and big families. Constructed of heavy-duty steel, our first-ever vertical bike rack safely hauls up to six mountain bikes to the trailhead. We designed and tested it in the lab and on the road to meet our demanding Yakima standards. The easy-to-operate tilt mechanism with two adjustable mast angles keep your bikes from bumping into your car, truck or SUV and makes accessing the tailgate a breeze. The HangOver’s vertical orientation carries more bikes in less space. Get ready to session! Product Details: - Transports up to 6 bikes using minimal space 37.5 lbs max per bike - Foot-operated tilt mechanism changes rack position for easy loading and unloading - Tilts down and out of the way for easy rear-of-vehicle access - Securely supports bikes by the fork crown - Fits suspension-fork bikes only - Fits fat bike suspension forks - Soft padding protects the fork’s finish - Rotating wheel cup accommodates bikes with various wheelbases - 2 mast height positions for improved ground clearance and ease of loading - 2 mast angles to avoid bike-tire contact with your vehicle - HitchLock included - Built-in bottle opener, cheers! - Fits 2" hitch receivers only - Add your own bike lock to the integrated lock loop for greater bike security Product Specs: - Weight: 73.00 lbs - Dimensions: L 22.00in x W 69.50in x H 60.00in - Some assembly required, 10 minute install - 2" hitch receiver required
Our burliest crossbar ever, the HD Bar is the one for heavy loads, rugged terrain and maximum utility. It delivers the muscle our new truck racks demand, and works with our StreamLine towers to get the heavy-duty job done right. The engineered aluminum construction provides superior support without weighing things down, integrated tie-down points to simplify load security, and T-slot attachment technology for adding gear mounts the fast, easy way. The Yakima Way. Product Details: - Strong, lightweight aluminum construction handles heavy loads great for rooftop tents - Integrated tie-down points on endcaps make it easy to secure gear - T-slots top and bottom to easily add Yakima and compatible gear mounts - Includes rubber infill for top T-slot for load protection and wind noise reduction - Built to last and look good doing it with a durable black powder-coat finish - Compatible with all StreamLine towers with our new HD Bar SL Adapter (sold separately #8003541) - Available in variety of lengths 55"/60"/68"/78" to create custom set-ups
Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks
Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Fit cars HYUNDAI - Santa Fe 5-dr SUV with Normal Roof 2013 - 2018 - Sante Fe Sport 5-dr SUV (Glass Roof) with Normal Roof 2013 - 2018 - Santa Fe 5-dr SUV (Glass Roof) with Normal Roof 2013 - 2018 - Sante Fe Sport 5-dr SUV with Normal Roof 2013 - 2018
Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Fit cars HONDA - Civic 4-dr Sedan with Normal Roof 2016 - 2019
Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Fit cars TOYOTA - Prius V 5-dr Wagon with Normal Roof 2012 - 2018
Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Fit cars HYUNDAI - Accent 5-dr Hatchback with Normal Roof 2018 - 2019
Premium aerodynamic load bars for an exceptionally quiet ride and easy installation of accessories. 2-pack. - Load bar for Thule Evo roof rack system - WindDiffuser technology disturbs airflow to reduce noise and drag for improved fuel economy - TrailEdge design reduces aerodynamic drag by allowing clean air separation from bar - SmartSlides slidable length scale doubles as an under-bar aerodynamic cover, providing quick, no-hassle rack installation - SwingBlade end cap pivots open to allow full access to the T-slot for easy accessory installs - Upper T-track with QuickAccess interface allows smooth installation and removal of accessories - BoxBeam internal structure creates an exceptionally strong load bar - Check the Thule Buyer's Guide for your vehicle's recommended bar length - 108cm / 43 in
$170.00 - $200.00
Thule's AeroBlade Load Bars are the strong, silent type. Using a sophisticated BoxBeam construction, they're some of the strongest load bars on the market with a capacity of up to 165 pounds. That's the strong, now for the silent: In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. The bars are easy to use, too, thanks to Thule's SmartSlide sytem that makes installation hassle free and their SwingBlade technology that allows full access to the T-slot for easy accessory additions.
Add even more cargo space to your pickup with Thule's Xsporter Pro Multi-Height Aluminum Truck Rack. This system attaches to the sides of the pickup bed, creating a whole other level of gear storage and rack options. Superior aerodynamics reduce drag and improve your fuel efficiency while Thule's WindDiffuser technology offers super quiet on-the-road performance. All-aluminum construction resists rust and provides high strength, so you'll get a lifetime of hard use out of this rack. The system also includes four matching lock cylinders to secure your gear.
The Thule Xadapt 2 Adapter Kit makes it possible to connect Thule carriers to Thule Rapid or Xsporter load bars. Please contact us with any questions regarding compatibility.
A smart fairing that easily attaches to any Yakima bar—and just about anyone else’s—to quiet wind noise and reduce drag. - Moves airflow up and over the rack to reduce drag and quiet wind noise - Band-style attachment quickly and easily attaches to any crossbar - Secures with easy-to-reach adjustments and included tool - Available in 4 sizes; find your fit at yakima.com/fit
This is a one bike add-on to turn your MonoRail 2-inch (sold separately) into a three bike carrier. Simply remove the end cap from the MonoRail, slide the attachment in and it quickly secures with two bolts. The cable lock included with the MonoRail is long enough to secure all three bikes. Simply and easy. Not compatible with 1.25-inch MonoRail.
The first load-assist mount to handle both SUPs and kayaks makes loading and unloading heavy boats and boards a breeze. The lightweight mount tilts down more than two feet from the roof rack, takes on up to 45% of the boat’s weight, then helps gently raise it up to the top of the vehicle. Once loaded, it securely cradles your boat or boards for the ride. At only 21 pounds, it’s super lightweight but built burly enough to wrangle an 80 pound load. Product details: - Easily load and unload kayaks and boards at waist level at the side of the vehicle with the easy to use slide and tilt mechanism - 80 lb. boat and board capacity easily handles a large kayak or two boards - Universal mounting hardware fits most roof racks - Lightweight materials and construction don’t eat up roof’s carrying capacity - Tilts down a lengthy 26" from roof rack height - Provides 30-45% weight assistance (depending on boat width) - Felt-covered cradles flex to conform to hull for secure transport - Folds down flat to reduce drag and noise when not in use - All tie-down straps included - Locks to base rack with SKS Lock Cores for added security (sold separately)
Fitting kit required for perfect fit of the roof rack to a specific car.
$125.00 - $225.00
Roll your own way – the SkyLine Towers work with our Landing Pads to create a customizable, mega-versatile, super easy-to-use system that easily handles your unique personality and extensive range of gear. - Complete SkyLine Tower set - Secure and simple – may be the easiest-to-use rack system out there - Fits all styles of Landing Pad (required) - Advanced tower architecture is sleek, strong and quiet - Works with JetStream, CoreBar and RoundBar crossbars - BarBed has 12° of pitch adjustment to optimize tower position and level bars on roofs with curved flush rails - Super-simple installation – tool included - Maximum load rating of 165lbs (75kg), depending on vehicle and bar rating\ TECHNICAL SPECS - Weight: 1.00 lbs - Dimensions: L 4.50” x W 4.50” x H 3.00”
Thule Traverse Fit Kit is designed to integrate with the Thule Traverse foot, creating a multi-purpose roof rack base system for your specific vehicle. The unique fit that the Fit Kit provides is the most solid and secure base rack possible.
Sleek, aerodynamic ski rack for all types of skis and snowboards. - Holds skis and snowboards securely with ultra-soft rubber arms that grip without scratching the surfaces - Safely carries thicker modern skis and snowboards and reduces the carrier height when unloaded with an integrated vertical spring system - Easy to open and close while wearing gloves, thanks to an oversized push button - Added roof clearance for skis with tall bindings, thanks to included extension feet that raise the carrier - Fits Thule rack systems, round bars, and most factory racks with both T-Track and SpeedLink around-the-bar mounting options - Holds up to 4 pairs of skis or 2 snowboards Technical specifications - Dimensions: 24.4 x 2.8 x 3.9 inch - Loading width: 19.6-inch
Page 1 of 9 Next page