Car Racks

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Fit cars FORD - Focus 4-dr Sedan with Normal Roof 2012 - 2018

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Premium aerodynamic load bars for an exceptionally quiet ride and easy installation of accessories. 2-pack. - Load bar for Thule Evo roof rack system - WindDiffuser technology disturbs airflow to reduce noise and drag for improved fuel economy - TrailEdge design reduces aerodynamic drag by allowing clean air separation from bar - SmartSlides slidable length scale doubles as an under-bar aerodynamic cover, providing quick, no-hassle rack installation - SwingBlade end cap pivots open to allow full access to the T-slot for easy accessory installs - Upper T-track with QuickAccess interface allows smooth installation and removal of accessories - BoxBeam internal structure creates an exceptionally strong load bar - Check the Thule Buyer's Guide for your vehicle's recommended bar length - 135cm / 53 in

Innovative kayak carrier that is safe, stylish, easy to use, and integrates seamlessly with Thule roof rack systems. Features - Quickly raise or fold when not in use using the convenient front release handle - Easily manage load straps while strapping down the kayak using the integrated StrapCatch - Kayaks are protected during transit due to the durable and soft rubber padding - Theft resistant design keeps carrier securely attached to load bars (locks included) - Easy to install directly into the Thule WingBar Evo or AeroBlade T-track, or around Thule SquareBar via the integrated, tool-free mounting hardware (SquareBar requires an adapter) Technical specifications - Load capacity: 75 lb - Dimensions: 18 x 8 x 17.5 in - Weight: 15.2 lb - Rubber cover for strap buckle - Lockable - One Key System compatible Fits the following Thule crossbars: - WingBar Evo - AeroBlade Edge - AeroBlade - SquareBar (Adapter/s required: Thule SquareBar Adapter 4-pack) - ProBar - Xsporter Pro

Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 2 SKS Cores and matching keys - 2 keys included plus a control key

Yakima's caged beast offers monstrous carrying capacity. The MegaWarrior is a perfect fit for mid- to full-size sport-utility vehicles and it's made of heavy-duty steel. You can easily attach bike mounts directly with its movable accessory bar and a custom fairing is included to cut wind noise and protect your cargo. The MegaWarrior's universal mounting hardware fits round and square crossbars, plus many factory racks, too.

Delta's Wheel Holder mounts to any flat surface to keep bikes stabilized. - Holds front wheel in place - Rigid steel stays with 9mm dropouts - Mounts to any flat surface

With more than a quarter century of real-world testing, Yakima's iconic round bar is proven across a range of adventures and under a variety of loads. Strong, utilitarian and easy to use—this classic is a classic for a reason. Bar adapter that allows you to run RoundBar on StreamLine Towers. - Adapter required to use RoundBars with the New StreamLine Towers. Sold in a set of four. - Includes 4 RoundBar end caps Product Specs: - Weight: 0.42 lbs. - Dimensions: L 2.00 in x W 2.00 in x H 1.00 in - Limited Lifetime Warranty

- Powdercoated steel body with 9mm skewer & hole in handle for padlock

You bought a Thule Podium Rack and now you need to match the feet to the roof of your car; don't sweat it. The Thule Podium Fit Kit arms you with the four pebax-coated, car-specific brackets and custom-fitted, rubberized footpads you need to mate the feet

Yakima's Trunk-Mount Security Strap is a steel-reinforced strap that lets you secure your trunk rack to your vehicle.

Saris' Wheel Straps keep your front wheels from spinning and your handlebars from turning in the wind. They're made of tough nylon with easy-to-use buckle closures. Wheel Straps are sold in pairs.

Make that spare tire work for a living – the SpareRide easily attaches to your rear-mounted spare and turns it into a bike rack. Durable, stable and secure, it installs easily. SuperCush cradles securely hold and protect your bikes, a bottle opener opens bottles, and integrated SKS locks bum out bike thieves. - SuperCush ZipStrip cradles secure the bikes and make loading and unloading a breeze - ZipStrips secure bikes to the rack and are fully removable - Anti-sway cradle design minimizes bike-to-bike contact - Fits nearly any stock size spare - SKS locking package secures bikes to rack to help prevent theft - TireTread pads add stability and protection - Steel construction is strong and durable - Universal mounting plate with extension fits most lug patterns - Locking knob secures rack and sparetire to vehicle - Yakima signature bottle opener lets you enjoy a post-ride cold one - 2-bike capacity TECHNICAL SPECS - Weight: 21.50 lbs - Dimensions: L 40.00” x W 13.00” x H 19.00”

For those cases where fitment just isn't right. The Hi-Lo is a 2" hitch Extension & Rise/Drop built with Kuat style. It provides 7" or 10" of extension and 2.125" of rise/drop. The Hi-Lo comes with a threaded hitch pin to ensure a tight fit in your receiver. Approved for use with the Kuat NV 2.0, Base 2.0, Sherpa 2.0 and Transfer family.

Custom Landing Pads to install directly to the factory fixed mounting points of the 2005+ Toyota Tacoma. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. Product Details - Includes a snap-on cover when not in use - Each pad sold in a set of two - Includes 4 metal "C" anchor plates 1-3/16" x 13/16" and 4 metal "D" anchor plates 1-1/2" x 13/16" (Contact Yakima Customer Service for additional size anchor plates) Product Specs - Weight: 0.86 lbs. - Limited Lifetime Warranty

All your bikes, all at once. The HangTight is designed for versatility, built to handle adventures of all sorts, and won’t blink at anything from kids to fat bikes to road to mountain bikes and everything in between. With fully padded cradles that support each bike by the handlebars, it serves up a shuttle-ready blend of stability and ease of use. The HangTight will get your bikes to the ride and back home safely no matter if your crew is a mix of all-mountain shredders or simply a family headed out for two-wheeled exploration. PRODUCT DETAILS - Transports up to 4 flat bar Bikes or 3 drop bar bikes using minimal space - Securely supports most road, mountain, kids, and cruiser bikes by the handlebar - Fully padded cradles protect your handlebars, including carbon bars - Rotating rear wheel cup fits a wide range of wheelbases up to 50" - Accommodates bikes up to 37.5 lbs. each - Holds 20"-29" tires up to 5" wide - Add your own bike lock to the integrated lock loop for greater bike security - Foot-operated tilt mechanism makes it easy to access the rear of the vehicle. - Dual cradle retention stabilizes and protects bikes from one another. - HitchLock included - Built-in bottle opener—cheers! - Fits 2" hitch receivers only - Compatible with the Yakima BackSwing and StraightShot (HangTight 4 only) - Not compatible with aero handlebars, clip-on aero bars, or handlebars larger than 35mm in diameter - Transport dual-crown fork bikes with the HangTight DH Cradle accessories (sold Seperatly) PRODUCT SPECS - Weight: 73.00 lbs.

Got a downhill bike - Fully padded cradle accommodates dual-crown suspension forks - For use with HangTight 4 and 6 only - Accommodates 1 bike up to 37.5 lbs. - Fits most modern flat and drop-crown style dual-crown suspension forks

Fully adjustable, upright bike carrier designed for the inside of the truck bed. Features: - Quickly secure the bike without frame contact using the ratcheting arm - Ideal for carbon frames, mountain, downhill, e-bikes and fat bikes - Accommodates wheel sizes from 20 - 29" and up to 5" tire - Lock bike to rack using Thule's One-Key System (lock included) - Holds 1 bike up to 50lbs - Fits all pickup tailgates - No bolting or drilling required Technical specifications: - Max number of bikes: 1 - Dimensions: 40.6 x 18 x 6.7 in - Weight: 11 lb - One Key System compatible

Expand your vehicle’s carry capacity (and your circle of friends) up to four bikes with the NV 2.0 Add-Ons. It's conceived for road trips, family group rides, and expeditions in the backcountry—we took the best platform rack on the market and increased it. Integrated Cable Locks - Seamlessly integrated locks—long enough to fit any frame—make sure your bike stays off Craigslist while you enjoy that post-ride beer stop. And when you’re ready to roll again, they stow right back into the rack. Adjustable Tire Cradles - Bikes not wanting to share space nicely? Easily dial in the fit with adjustable tire scoops. You get three positions to choose from, so handlebar and seat post clearance is never an issue. - Intuitive Front Tire Ratchet - Trail-Doc Compatible - Premium Matte Black Powdercoat

Getting your skis and boards to the slopes has never been easier with the new EXO SnowBank. Pair it with an EXO GearLocker and you have customizable storage for everything you need. Carry up to five pairs of skis or four snowboards on the back of your vehicle—enough for your entire crew. - Connects to the EXO SwingBase or EXO TopShelf in seconds using the EXO cleat system - Carries 5 pairs of skis or 4 snowboards - DoubleJoint hinge expands for easy use with thick skis and boards - Large button makes it easy to open with gloves or mittens on - Tool-free, locking SpeedKnobs attach and lock EXO SnowBank to EXO SwingBase or EXO TopShelf - Use SKS Locks included with EXO SwingBase or EXO TopShelf to lock skis and snowboards - Fits skis up to 185cm long on most standard width vehicles - Limited Lifetime Warranty - Requires EXO SwingBase and/or EXO TopShelf Product Specs: - Weight: 13.25 lbs. - Dimensions: L 21.50 in x W 32.00 in x H 4.50 in - Limited Lifetime Warranty

Organize and stow your camp kitchen gear with this all-in-one system, simplifying your effort so it’s always ready to grab-and-go. The rugged, road-worthy box can seamlessly attach to the EXO System for smooth transport to your campsite, trailhead, or ball game. Open it up and turn it into a fully functional work station, making it easy to prep, cook, and serve from the same spot. The system can also be expanded with side-mounted tables and a free-standing Leg kit to grow and customize your EXO OpenRange as needed. PRODUCT DETAILS - Connects to the EXO SwingBase or EXO TopShelf in seconds using the included EXO cleat system - Durable rotomolded enclosure with a rubber door seal keeps your gear fully protected from weather, dust, and critters - Fold down front door allows easy access to your gear and can be used as a prep surface - Internal shelf and integrated utensil drawer help to organize your cooking and camp gear - 85 liters (90 quarts) of internal storage space - Includes SKS locking latches to secure your gear - Tool-free, locking SpeedKnobs attach and lock EXO OpenRange to EXO SwingBase or EXO TopShelf - Includes a lantern hook, backboard organizer and handheld bottle opener - Full suite of accessories available to expand your EXO OpenRange - EXO SwingBase and EXO TopShelf recommended but not required for transport - Made in the USA PRODUCT SPECS - Weight: 37.00 lbs. - Dimensions: L 31.00 in x W 18.00 in x H 18.00 in - Limited Lifetime Warranty

Getting pressurized water to your destination just got even easier. The EXO RoadShower Kit lets you attach the RoadShower 4G and 7G to your EXO system giving you more mounting options for your RoadShower. Product Details - Connects RoadShower 4G and 7G to the EXO SwingBase or EXO TopShelf in seconds using the EXO cleat system - Tool-free, locking SpeedKnobs attach and lock RoadShower 4G and 7G to EXO SwingBase or EXO TopShelf - Heavy-duty steel construction with durable, powder-coated finish - Includes all mounting hardware (EXO System and RoadShower are sold separately) - Not compatible with RoadShower 10G Product Specs - Weight: 2.46 lbs. - Dimensions: L 14.00 in x W 3.00 in x H 4.00 in

Add on for Bed Rider Pro Compact or Full Size

Provides a clean and sleek look for your Saris Bones rack, these end caps allow excess strap length to be tucked neatly inside rack - Provides a clean and sleek look for your Saris Bones rack - Upgrade your current Bones or Bones EX rack (pre-2022) - Compatible with: Bones or Bones EX racks - Not compatible to use with any Bones Hitch racks or SUPERBones

- Bring it all - Designed for full full-size and compact pickup trucks, this bed level truck rack is perfect for carrying a rooftop tent, basket and other equipment up to 220lbs. - Includes two crossbars and four mounting feet - Made from durable, corrosion corrosion-resistant aluminum for years of use - Includes the Thule OneKey system to lock the truck rack to the truck bed - 2 sizes available: Full Full-Size & Compact

Is your vehicle roof looking a bit naked? Add the BaseLine FX, an advanced roof rack with integrated crossbars and towers that has no bar overhang so your vehicle will have a clean, modern aesthetic. The easy-to-adjust design means it adapts to the shape of your vehicle's roof for a secure, ready-to-load roof rack.

Thule's Passive Lock Strap provides added security by locking your bicycle rack to your vehicle. Two steel cables enclosed in nylon form a strong durable strap that won’t scratch your vehicle, bike or carrier. A round puck installs securely in trunk or hatch, preventing rack removal.

Lightweight aluminum hitch bike rack provides outstanding bike protection and easy-on, easy-off convenience. Features - Super lightweight aluminum construction is half the weight of steel hitch bike racks, providing easy installation, removal, and handling - Unsurpassed hanging hitch carrier bike protection with industry-leading 7" spacing between bikes - Superior bike stability and fit with integrated anti-sway that prevents bike-to-bike contact and "disappears" when not needed - Convenient access to rear of vehicle - HitchSwitch feature allows rack to be easily tilted down - Complete bike security with integrated cable lock (lock included) - Quick, secure and confidence inspiring bike attachment with ratchet strap cradle strap - Easily fold down bike arms when not in use with conveniently located HitchSwitch lever - Compact cradle design accommodates wide variety of bike sizes/frame styles - Fast, tool-free installation with SnugTite stinger design delivering maximum speed, stability, and security (lock included) - Transferable between hitch receivers, fits 1.25" and 2" hitches Technical specifications - Max number of bikes: 3 - Load capacity: 112.5 lb - Max bike weight: 37.5 lb - Dimensions: 39 x 11 x 37.3 in - Folded dimensions: 21.9 x 11 x 37.3 in - Weight: 20 lb - Distance between bikes: 7 in - Carbon frame compatible - Fits 1.25" receivers - Fits 2" receivers - One Key System compatible - Bike lock included - Receiver lock included

Like the first version, the Pivot v2 will make sure your rack never gets in the way. Smoothly swing up to a 4-bike rack to the side for clear access to tailgates, rear doors, and hatchbacks. And when it’s time to load up, the locking mechanism makes sure your rack only moves when you want it to. - Clearance for tailgates or rear doors - Proprietary FLATLOCK cam system - Locking hitch pin - Lifetime Warranty - 2” Hitch Only - Quick-release 90 or 120 degree swing away - Driver-Side or Passenger-Side Swing Options - Compatible with fully loaded 4-bike NV 2.0 - Load up to a maximum of 250lbs

Premium fork mount roof bike rack for the bike enthusiast with fast and easy mounting for both Thru-axle and standard Quick-release bikes. - Easily mount Thru-axle bikes (9-15mm) and standard Quick-release bikes (9mm). Fits 20x110mm Thru-axle bikes with an additional adapter (sold separately) - Accommodates bikes with disc brakes - Fasten your bike to the fork adapter on the ground for easy mounting - The bike slides into the carrier on a guided track on the fork adapter and clicks into place - Convenient and easy installation of fork adapter for a secure bike fit - The fork mount rack is easy and safe to mount thanks to audible and visual confirmation of correct mounting - Unmount bikes from the rack easily with a release lever - Safe mounting of Quick-release bikes thanks to Thule AcuTight torque limiter knob that click when optimal torque is reached - Locks the bike to the bike rack and the bike rack to the roof racks (locks sold separately) - Easy to switch carrier position from one side of the vehicle to the other

A set of extra-long replacement wheel straps to enable transport of very large-tire fat bikes. - Fits Thule EasyFold XT bike racks

Thule's AeroBlade Edge is an integrated foot/load bar with a low-profile, aerodynamic design for vehicles with a factory roof rack. The AeroBlade bars use BoxBeam construction, making them some of the strongest load bars on the market with a capacity of up to 165 pounds. In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. The feet fit your vehicle's roof rails without a fit kit and they're T-track compatible as well.

The Original Pickup Truck Bike Hauler Pad For Late-Model, Full-Size Ford and Dodge Trucks Trailhead commute or gravity-shuttle duty, no bike rack compares to the convenience of a Pickup Pad. The Dakine Pickup Pad DLX Curve is made to fit the curved shape and back-up camera location of late-model, full-size Dodge, and Ford tailgates. It has tie-downs for up to seven bikes and a built-in security grommet so you can lock it to your truck. We've stiffened the ends of the webbing straps for easy installation under the tailgate and added cam-action buckles for quick removal. - 2 Year Limited Warranty - Fits the curved tailgates of late-model, full-sized Ford and Dodge trucks - Padded tailgate protection - Large access flap for tailgate handles and rear-view cameras - Seven individual bike anchor straps - Four web cinch straps - Anti-theft construction - Reflective logo

For rides long or short, bring your bikes with ease. Features - Superior bike stability and fit with integrated anti-sway that prevent bike to bike contact and ‘disappears’ when not needed - Bikes are safe and secure during transport thanks to 7” of spacing between each bike - Quickly attach bikes and easily secure them to the rack using the ratcheting cradle strap - Compact cradle design accommodates a wide variety of bike sizes/frame styles - Effortlessly fold down bike arms when rack is not in use - Convenient access to the rear of the vehicle using the HitchSwitch lever to tilt the rack down - Easily transfers between 1.25” and 2” hitch receivers Technical specifications - Max number of bikes: 2 - Load capacity: 75 lb - Max bike weight: 37.5 lb - Dimensions: 28.3 x 11 x 35.6 in - Folded dimensions: 14.8 x 11 x 35.6 in - Weight: 28 lb - Distance between bikes: 7 in - Carbon frame compatible - Tilt function (with bikes) - Fits 1.25" receivers - Fits 2" receivers

Upright bike carrier for the quickest, most convenient mounting – for bikes up to 44 lbs. - 2 One Key lock cylinders (sold separately) lock the bike to carrier and carrier to rack. - Mounts to all Thule rack systems, round bars and most factory racks - Automatically positions your bike when you secure it, thanks to the uniquely designed frame holder and wheel tray - Quick and easy bike securing – the torque limiter dial controls the force going into the bike frame with a clear sign of correct mounting - Pressure is spread via large, soft claw pads that adapt to your bike’s frame tubes – minimizing the risk of frame damage - Safe mounting – your bike is prevented from falling thanks to the claw’s extended lower jaw - Stable wheels – firmly fixed in smartly designed wheel holders with diagonal quick-release wheel straps - Easy, tool-free interface for switching carrier from one side of your car to the other.

The Transfer v2 is more solid than ever. From the steel construction of the original to a new Flatlock hitch cam for enhanced stability in tow. Plus, a semi-integrated cable lock for an upgrade in security. The best part? The new Transfer v2 has the modular configurations available so you get a multi-rider rack at an everyone-friendly price. - Flatlock cam for 2", ball cam for 1.25" - Includes semi-integrated bicycle cable lock - Tamper-resistant hitch security - More robust hitch design for enhanced stability in tow - Holds up to a 50" wheelbase bike (previously 47") - Holds wheels 18"-29" (previously 20"-29") - Holds tires up to 5" with accessory strap (previously 4.5") + better hook clearance for loading fat bikes - Automotive-grade 750 hour salt spray hardware - Dedicated 2" hitch version in the 2 bike configuration can be directly mounted on campers, recreational vehicles, or trailers with CHASSIS MOUNTED RECEIVERS ONLY.

Fat bike skewer and thru axle tube adapters for the Küat Trio roof rack.

Two 13-foot or 10-foot locking straps with One Key locking cylinders. - Two locking straps - Steel cables inside a theft-resistant nylon sleeve provide a dual-layer locking system - Lightweight and corrosion resistant aluminum buckle - Lock housing rubber-coated to prevent vehicle and equipment scratches - Two One-Key lock cylinders included

Versatile, adaptable, and super low-maintenance, the JayLow provides maximum loading and minimal fuss. Carry one boat in cradle position, or two boats in stacker position. Carry 1 boat in J-cradle position or 2 boats in vertical, stacker position - Fully assembled out of the box - Tool-free installation Fits Yakima round, square, factory, or aerodynamic bars - Adjust the upright position with the easy-to-use integrated cam lever - Folds flat when not in use - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs - SKS Locks sold separately - Supports one boat up to 80 lb or two boats with combined weight of 110 lbs or less - Minimum crossbar spreads of 24inches or more

Combining modern aerodynamics with old-school muscle, the new CoreBar is the first aero bar built with roll-formed steel’s strength, utility and durability. The JetFlow design is wind-tunnel tested to reduce drag for less wind noise and better fuel economy, and the galvanized steel delivers proven load-bearing performance. - Wind tunnel tested JetFlow teardrop shape is strong, quiet and exceptionally aerodynamic - Roll-formed galvanized steel holds the load - Sleek aerodynamic design looks awesome on your car’s roof - Vinyl wrapped for durability and corrosion resistance - Includes CoreBar SL Adapter to integrate with all StreamLine System Towers - Available in 4 sizes: SM (50”),MD (60”), LG (70”) and XL (80”)

Features - CustomAdjust Bar Height provides maximum carrying versatility for easy loading, carrying and storage - Integrated AirTrip bar technology redirects airflow for superior aerodynamics - WindDiffuser technology disturbs airflow to reduce noise and drag for improved fuel economy - Included tool-free load stops help secure oversized loads - Installation requires no cutting or drilling and only limited assembly - SecureLock locks the rack to the truck with four One-Key lock cylinders (included) Tech Specs - Dimensions: 16 x 71 x 29 in - Maximum load: 450 lb/204 kg. Please also check the maximum roof load capacity of your vehicle.

Fast, secure, and easy to use, the HoldUp EVO is built to handle new bike standards, like fat tires and boost hubs, but it easily carries the classics too. The StrongArm hook secures the bikes at their wheels, protecting carbon frames and painted surfaces. Tilt the rack with bikes loaded for quick rear-of-vehicle access using the new easy-to-reach tilt lever and KickStart foot pedal. The super-simple locking SpeedKnob makes install a tool-free breeze and included SKS bike locks keep your mind at ease. - Hitch-mounted tray rack that loads quickly and carries two bikes without frame contact - Easy-access tilt mechanism and KickStart foot pedal make raising and lowering the rack a breeze, even with bikes loaded - Tool-free locking SpeedKnob makes installation and removal fast, easy and secure - StrongArm hook secures bike at wheels, protecting painted surfaces and carbon frames - Easily adjust trays to reduce bike-to-bike interference - Fits most bikes, including fat-tire, mountain, road, hybrid, women's-specific, BMX, kids' bikes, & E-bikes under 50 lbs. - Accommodates disc brakes, through axles, boost hubs, and full suspension bikes - Fits 20" to 29" wheel sizes and tires up to 4.8" wide - Accommodates bike wheelbases up to 48" - Integrated SKS (Same Key System) locks included for added bike security - Carry four bikes – just add the HoldUp EVO +2

Built to handle heavy loads on backcountry terrain, the OutPost HD truck rack is ready for rugged overland adventures. The mid-height design provides a low center of gravity, easy accessibility to gear, and the perfect platform for the SkyRise Rooftop Tent. Leveraging our new HD Bars for a 500-lb. on-road carrying capacity, and paired with Yakima’s 300-lb. Off-Road Rating, the OutPost HD truck rack is a firmly engineered foundation for a fully loaded overland rack system. Pair the OutPost HD truck rack with the HD Bar length that best fits your bed and gear (HD Crossbars sold separately). Add our SideBar, mounts and accessories, then you’re set to explore the backcountry with confidence. Product Details: - Comes with four towers - Requires Yakima HD Bar crossbar in 60"/68"/78" lengths (Sold Separately) - Fixed mid-height position of 13" provides easy gear access and a low center of gravity - Maximum on-road rating of 500 lbs. - Maximum off-road rating of 300 lbs. - Easy on-off placement in minutes with our patent-pending QuickChange rack attachment - Designed and tested for all common truck beds using our BedGrip clamp design - Additional required kits needed for tracked beds (Track Kit 1) and select tonneau covers (Tonneau Kit 1) - Built to last, with engineered aluminum construction and durable powder-coat finish - Compatible with all Yakima mounts to carry kayaks, surfboards, bikes, rooftop tents and more - Integrated tie-down points make securing any load easy - T-slot attachments make adding gear mounts and accessories fast and simple - Integrated SKS (Same Key System) locks your rack system to the truck bed - Suggested accessories: SideBar, Rotopax Mounting Kit, Recovery Track Mount, Eye Bolts, SkyRise Tent Product Specs: - Weight: 38.50 lbs - Dimensions: L 16.75in x W 5.50in x H 16.50in - Some assembly required, 60 minute install

Our burliest crossbar ever, the HD Bar is the one for heavy loads, rugged terrain and maximum utility. It delivers the muscle our new truck racks demand, and works with our StreamLine towers to get the heavy-duty job done right. The engineered aluminum construction provides superior support without weighing things down, integrated tie-down points to simplify load security, and T-slot attachment technology for adding gear mounts the fast, easy way. The Yakima Way. Product Details: - Strong, lightweight aluminum construction handles heavy loads great for rooftop tents - Integrated tie-down points on endcaps make it easy to secure gear - T-slots top and bottom to easily add Yakima and compatible gear mounts - Includes rubber infill for top T-slot for load protection and wind noise reduction - Built to last and look good doing it with a durable black powder-coat finish - Compatible with all StreamLine towers with our new HD Bar SL Adapter (sold separately #8003541) - Available in variety of lengths 55"/60"/68"/78" to create custom set-ups Dimensions: - Small = 9.61 lbs, L 55.00in x W 3.00in x H 1.50in - Medium = 10.68 lbs, Dimensions: L 60.00in x W 3.00in x H 1.50in - Large= 11.65 lbs, Dimensions: L 68.00in x W 3.00in x H 1.50in - X-Large= 12.00 lbs, Dimensions: L 78.00in x W 3.00in x H 1.50in

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Fit cars HYUNDAI - Santa Fe 5-dr SUV with Normal Roof 2013 - 2018 - Sante Fe Sport 5-dr SUV (Glass Roof) with Normal Roof 2013 - 2018 - Santa Fe 5-dr SUV (Glass Roof) with Normal Roof 2013 - 2018 - Sante Fe Sport 5-dr SUV with Normal Roof 2013 - 2018

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Fit cars NISSAN - Juke 5-dr SUV with Normal Roof 2011 - 2018

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Fit cars MAZDA - CX-3 5-dr SUV with Normal Roof 2016 - 2019

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points or factory-installed racks. Features - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Check the Thule Buyer's Guide to find out which fit kit fits your car Fits Cars CHEVROLET - Spark 5-dr Hatchback with Normal Roof 2013 - 2015 - Spark 5-dr Hatchback with Normal Roof 2016 - 2020

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Fit cars CHEVROLET - Malibu 4-dr Sedan with Normal Roof 2016 - 2019

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Fit cars KIA - Rio5 5-dr Hatchback with Normal Roof 2012 - 2017

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks NISSAN - Versa Note 5-dr Hatchback with Normal Roof 2014 - 2019

A straight-forward, easy-to-use, locking QR skewer that fits any fork-style bike mount on the market. Compatible with any 9mm x 100mm axles. - Durable stainless steel axle and body - Easy-to-adjust end nut and cam lever - Lockable with SKS lock, sold separately

Thule's XK3 Xsporter Rack Adapter makes your Toyota Tacoma compatible with Thule's revolutionary Xsporter truck bed rack system (sold separately).

We've all had a friend like The Dirtbag at some point in our lives. He's cheap and a little rough around the edges. Not the kind of guy you'd want to introduce to your business associates, but he's dependable and always makes for a good time. The Dirtbag is the most affordable rack on the market, it's easy to use and can be easily bolted to just about anything.

Use Yakima's LoadWarrior Stretch Net to secure and control loads on the LoadWarrior rooftop cargo rack (sold separately). The multi-hook design is versatile and easy to use.

Use Yakima's MegaWarrior Stretch Net to secure and control loads on the MegaWarrior rooftop cargo rack (sold separately). The multi-hook design is versatile and easy to use.

An adapter for Thule TopRide/Thule FastRide to enable transport of bikes with 20x110mm thru-axles. - Enables transportation of bikes with 20x110 mm thru-axle forks