Lighting

- Waterproof IPX7: Operates even after 30 minutes of submersion in a depth of 1 meter - 3x brighter than EL135 - OptiCube lens technology - Low battery indicator - Mode memory function - Two light modes (Constant / Flashing) - Replaceable bracket spacer - FlexTight bracket - Runtime : Constant: 30 hours (50 lumens) (Approx.) Flashing: 250 hours (50 lumens) - Battery type : 2 x AA alkaline battery - 5 ultra bright LEDs - Design offers high visibility - 3 modes: rapid, flashing, constant - Run time: R - 60h to 120h, F - 40h to 120h - 2x AAA batteries included - FlexTight bracket

Flexible Versatite™ mount for Dash, Zot, Dart, Hotrod, Hotshot Micro 2W, Hotshot Pro 200 (flexible mount version; not for Hotshot Pro 200C) systems. Compatible with most handlebars, seat posts, and seat stays including aero styles.

Light Part

O Rings spare parts for Grid Side Beacon lights.

Lezyne's Go-Pro LED Adapter allows you to mount your Lezyne LED light to any standard Go-Pro mount. This makes it fast and easy to switch swap out your camera and headlight using the same mount.

The NiteRider Tail Light Mount – Seatstay and Seatpost is our classic seatpost mount design that gives riders the option to mount their tail light to their seat stay, using the included seat stay clamp. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL

- Attaches to rear racks - Compatible with: Blinky 3,5,7 and Superflash - 25mm between each of the top horizontal holes (center to center) - Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack

Mounting bracket for MSW front White Bat Headlight. - Includes 1 front mounting bracket

Replacement bracket for Pico and Tigermoth lights. - Includes 1 front bracket, 1 rear bracket, and 2 mounting straps

- Fits seatpost (up to 31.8mm) or seatstay - Compatible with: Blinky 3,5,7, all Superflash lights and Blinky Safety rear light - Use with Blinky Safety Front light bracket to fit oversize (~31.8mm) handlebars

- Compatible with all Blaze headlights, Beamer 1/3/5, 1200, Dual Spot, and Bright Spot bike headlights - Fits 25.4 – 31.8mm handlebars

- Fits 25.4-31.8mm handlebars - Compatible with Blaze, Beamers, 1200, 5000x and Super Spot

Compatible with Shiner and Shiner Back lights - Rubber pad with loop straps to quickly mount and remove light for recharging - 50mm bolt spacing to fit most rear racks

Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works. - Compatible with all PDW rear lights except the Asteroid and Fenderbot - Horizontal holes are 50mm apart to fit European rack standards - Vertical holes are 18mm apart to fit most reflector mounts

Replacement Part – Aero Tail Light Bracket - Works For Both Headlight & Tail Lights - Great For Helmet Application - 3 Strap Sizes Allows Fitting From 20mm To Over 100mm - Adjusts To Fit Aero & Round Seat Posts & Handlebars Compatible With: TST-70 TST-100 TST-150 TBT-50R TBT-120F

Replacement Part – Multi Sport Headlight & Tail Light Bracket - Works for both headlights & tail lights - Great for helmet application - 3 strap sizes allows fitting from 20mm to over 100mm - Adjusts to fit aero & round seat posts & handlebars - For lights up to 120 grams in weight - Cannot be used with: TST-70, TST-100, TST-150, TBT-50R, TBT-120F, USL-200, USL-250, USL-450, USL-500

Use to securely mount serfas tail lights to any compatible rear rack. Serfas Tail Light Compatibility: - TBT-50R Thunderbolt 2.0 - TST-70 Scorpius 70 - TST-100 Scorpius 100 - TST-130 Scorpius 130 - TST-300 Scorpius 300 - TSV-130 Vulcan 130 - TSV-350 Vulcan 350

Replacement Part – Top Bar Headlight Bracket - Works with flat top & round handle-bars - 3 strap sizes allow fitting from 20mm to over 100mm - Adjusts to fit aero & round seat posts & handlebars - For lights up to 120 grams in weight - Fits all Serfas headlights EXCEPT: USL-200, USL-250, USL-450, USL-500

Optional Accessory Rear rack Bracket for mounting most CatEye Taillights to rear racks with 50/80 mm spaced mounting holes.

The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seat posts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL Not compatible with omega 300 and sentry aero 260 tail lights.

-Mounts easily to front racks with threaded M5 mounts -Allows for unobstructed light positioning -22.2mm clamping diameter

Replacement Part – Universal Handlebar Bracket - Fits all current Serfas headlights with a removable bracket - Fits bars up to 31.8mm horizontal & vertical adjustable - Easily removes from bar in seconds - No tools needed - Works With: TSL-100, TSL-150, TSL-150+, TSL-200, TSL-250, TSL-250+, TSL-500, TSL-500+, TSL-1000, TSL-1500, SL-155, SL-255, USL-155, USL-305, USL-505, TSL-350, TSL-550, TSL-750, TSL-T1000, TSL-LT1000, TSL-1200, TSL-1800, TSL-2500, HL-1.1, & SL-30WP - Works for all Serfas headlights EXCEPT for SL-200 & SL40WP

Be seen with CatEye's Omni 3 Taillight, which uses Omni Directional Technology for 360 degrees of visibility. Three super-bright LEDs light up in three different modes so you can customize the pattern and get run times up to 200 hours. Plus, CatEye's tool-free mount makes installation a breeze.

Mount your Cygolite bicycle headlight to a variety of GoPro compatible interfaces and third-party mounting options that are compatible with the GoPro interface. - Compatible with Ranger, Expilion, Metro, and Streak series - Includes adapter piece only

Mount the Nip light to an e-Bike that has the specialty Pro Max stem for accessories.

Light & Motion's Vis 180 Aero Post Pad lets you easily attach your Vis 180 taillight to the back of your aero seatpost so you can be fast and visible.

This mount is designed to securely attach your Light and Motion Vis 180 Micro taillight to your bicycle.

This mount securely attaches your Light and Motion Vis 180 Micro taillight to a standard rear bicycle rack (taillights and racks sold separately).

Strap Light & Motion's Vis 360 Spare Front Mount to your spare helmet and use your Vis 360 light no matter what lid you are wearing.

Strap Light & Motion's Vis 360 Spare Rear Mount to your spare helmet and use your Vis 360 light no matter what lid you are wearing.