Filter By:
- Electronics (209)
- Eyewear (19)
- Fenders (116)
- Hydration (189)
- Lighting (322)
- Locks/Security (174)
- Nutrition (84)
- Packs/Racks/Baskets (293)
- Show More Categories
- Pumps/Inflation (206)
- Safety (78)
- Storage (39)
- Tools/Maintenance (699)
- Trailers/Strollers (77)
- Indoor Cycling (26)
- Other (92)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Accessories

$4.99
- Attaches to rear racks
- Compatible with: Blinky 3,5,7 and Superflash
- 25mm between each of the top horizontal holes (center to center)
- Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack

$5.00
Featuring black backing, gold thread, and an up-close look at the AC logo on our brazed-on seat collars, the 3" Damn Fine Patch is perfect for applying to your favorite hat, bag, jersey, or jacket.

$5.00
- Installs and seats against the inner race of the cartridge bearing for removal (punch from other side of tool against tool flats)
- Effectively fits on cartridge bearings with 10-25mm inner race ID's

$5.00
The K-EDGE co-polymer insert for Garmin 1/4 Turn style computers is a replaceable item. While it is extremely strong, we designed this insert to fail on a significant impact before the tabs on the back of the Garmin break.
- Qty 1 – K-EDGE Co-polymer Insert for Garmin 1/4 Computer (Part No. K13-503)
- Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws

$5.00
Replacement plastic insert kit for K-EDGE Wahoo Mounts.
The co-polymer insert for Wahoo 1/4-turn style computers is a replaceable item. While it is extremely strong, it is designed to fail on a significant impact before the tabs on the back of the Wahoo break.
Attributes (specs):
– Qty 1 – K-EDGE Co-polymer Insert for Wahoo 1/4 Computer (Part No. K13-1604)
– Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws

$5.00
Replacement magnet for MSW Miniac Double Speed & Cadence computers. Includes water-resistant cadence magnet and four plastic zip ties for mounting to pedal crank arm.

$5.00
Replacement bracket for Pico and Tigermoth lights.
- Includes 1 front bracket, 1 rear bracket, and 2 mounting straps

$5.00
This reflective yellow leg band with adjustable hook and loop closure secures loose pant legs to prevent chain catching.
- Reliable hook and loop closure system works both wet and dry
- Reflective yellow material for additional visibility
- 1.25-inch width

$5.00
The MSW Computer Spoke Magnet is designed to fit round and bladed spokes of various diameters.
- Tool-free installation
- Alloy construction
- Fits round and bladed spokes

$5.00
Park's Chainring Nut Wrench makes chainring bolt installation and removal easy. It securely holds the slotted nut to prevent spinning when tightening or loosening the bolt. And, it's double-ended to fit most slotted-type nuts, including Campagnolo chainring bolt nuts.

$5.00
There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.

$5.00
Park's Gear Clean Brush has a handle on one end with a curved, serrated edge perfect for cleaning between cassette cogs. The other end's tough nylon bristles are ideal for cleaning the derailleurs, chain and other drivetrain parts to keep them clean and prevent premature wear. It also works great on brakes and other components that collect dirt and grime. The GearClean easily fits in a toolbox or pack.

$5.00
• Updated with a new material and new design
• Features a wide flat tip for easy entry and fast tire removal, ergonomic shape and a handy spoke hook when multiple levers are needed
• Perfect for tight beads and tubeless tires
• Sold in sets of two.

$5.00
- Contains 2 Mudflaps and Quick-Snap attachments
- Compatible with: ATB Hardcore and SpeedEZ fenders (sold separately)
- For use with 60mm width fenders (sold separately)

$5.00
Compatible with:
- Hardcore bike fenders - 700c x 45mm
- Full bike fenders - 700c x 45mm
- SpeedEZ bike fenders - 700c x 45mm
- Hardcore Recumbent bike fender - 700c rear
- Contains 45mm rear fender plastic clip, fork and brake bridge thru bolts, stay bolts and lock washers

$5.00
- Contains 2 Mudflaps and Quick-Snap Attachments
- Compatible with: Road Hardcore fenders (sold separately)
- For use with 35mm width fenders (sold separately)
$5.00
- Mounts Beamer and Blaze 1/2W lights to a helmet
- Compatible with Beamer 1, Beamer 3, Beamer 5, Blaze 1/2W and Blaze 2W Micro, Blaze 140 SL, Blaze 180 USB
- Increased weight and length of Blaze 300, 500, and 650 USB lights may cause awkward mounting on helmet

$5.00
- Contains 2 Mudflaps and Quick-Snap Attachments
- Compatible with all hybrid (45mm) fenders (part#s 7004, 7006, 7013, 7015) (sold separately)
- For use with 45mm width fenders (sold separately)

$5.00
- Fits seatpost (up to 31.8mm) or seatstay
- Compatible with: Blinky 3,5,7, all Superflash lights and Blinky Safety rear light
- Use with Blinky Safety Front light bracket to fit oversize (~31.8mm) handlebars

$5.00
The Problem Solvers Suspension Pump Adapter is for use with model-year 1999 to 2000 RockShox SID suspension forks. This aluminum adapter threads into the fork to add air and fine-tune the pressure.

$5.00 - $24.00
Keep your Reverb dropper post performing at its best with RockShox's Reverb Hydraulic Fluid. It's optimized for the remotes of the Reverb as well as the Monarch XX rear shock.

$5.00 - $37.00
RockShox's Suspension Oil comes in different weights to match the most popular suspension fork and shock setups.

$5.00
The QuickView was designed to put the Garmin Edge Computer out in front of the stem. Fits Garmin 605 and 705.
- Glass-filled nylon, stainless steel Torx T25 bolt
- Weight: 20g

$5.00
Shimano Wiring Plug Tool for use with Di2
- Tool is required to assist Di2 shifter plug installation
- Shimano TL-EW02 tool for connecting and disconnecting the Di2 wiring harness and shifter plugs
- For use with Dura-Ace 9070, Ultegra 6870/6770 and Alfine Di2 components and E-Tube wiring